Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
202 blue/black motor has same ports?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
202 blue/black motor has same ports?
Will my inlet manifold and exhaust fit from my blue motor to a black motor??
Get out there!!
Re: 202 blue/black motor has same ports?
Yes it will but make sure you don't get caught out with the efi 3L gear.Wozza244 wrote:Will my inlet manifold and exhaust fit from my blue motor to a black motor??
Had a mate get the conversion cheap - it was the injection of a RB30.
Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
[/quote]
Yep some of the VK Black motors were injected sixes. They went well too, I recall reading somewhere (maybe motor mag?) back in 1984 that they were the first factory 6 cyl commodore to reach 200 klicks around their test track.Wozza244 wrote:Ah right so some blacks were injected??
Im not up to date with the specs mate, but yeh sounds good if the carby black motor is same.
Thanks mate..
The carby and EFI black motors had pretty much the same cylinder heads as the blue motor which was the first of the factory 12 ports.
All from memory though so don't quote me as I'm too old and damaged too many brain cells over the years.
TD 80 Series, F&R Lockers, Winch etc
the heads are the same but the black carby motor had air injection
get some grub screws fit them with locktite then grind the lump inside the port or not doesnt make that much difference
dont use bolts in the air injection ports as the manifold hits them
get some grub screws fit them with locktite then grind the lump inside the port or not doesnt make that much difference
dont use bolts in the air injection ports as the manifold hits them
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
have most parts available from early to late
call mick 0415156693
v8zuki wrote:the heads are the same but the black carby motor had air injection
get some grub screws fit them with locktite then grind the lump inside the port or not doesnt make that much difference
dont use bolts in the air injection ports as the manifold hits them
Ok, hopefully they have some there, im buying an engine minus all the starter alt, dizzy and such.
Use all my other gear on it from the blue motor.
Get out there!!
While you have it apart, put a decent cam in it & flick the Holley for a Weber of a Falcon.
You wont be dissapointed, it wont go like a V8 but it will go nicely.
You wont be dissapointed, it wont go like a V8 but it will go nicely.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
Who is online
Users browsing this forum: No registered users and 0 guests