Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lift troubles

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 17
Joined: Tue Jul 07, 2009 7:46 pm
Location: Tin Can Bay

lift troubles

Post by nobbie »

hi ive recentally put a 5-6 inch lift on my patrol and the front drivshaft is rubbing on the gearbox crossmember whilst sitting on level ground how do i fix that? ive been told just to smash it with a hammer. any help is appreciated i wana get out there and test it out
cheers aydan
Top
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

smashing it sounds a bit ruff lol. with 6 inch im gessing its a bit of a wepon so id consider finding yourself a local fab shop and getting a custom one made up or im gessing sum1 probaly sells one. id steer clear of smashing or chopping the factory 1 could brake it.
Blown ls1 GQ winch truck. and GU tow car / daily
Top
Posts: 211
Joined: Sat Jun 19, 2004 1:32 pm
Location: Endeavour Hills - Vic

Post by cmcd »

Put a notch in it:

Image

Image
Macca

[url=http://tinyurl.com/6ok59d]1990 GQ Patrol[/url] - 4" & 33's
[url=http://www.4bfabrications.com.au]4B Fabrications[/url]
Top
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

Post by waandy »

if your handy with a grinder and welder you could notch a section out and put a piece of pipe cut in half back into it. but if its rubbing at ride height might not give you enough. i need to take a skim off mine in a shorty with a 4 inch as it rubs at full droop just a tad
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
Posts: 17
Joined: Tue Jul 07, 2009 7:46 pm
Location: Tin Can Bay

Post by nobbie »

yea that sounds like the go smashing it sounds a bit ruff to me as well hahah cheers fella's
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

don't bother with the pipe, just plate it. The outside section left from the pipe does nothing, so why not cut it right off.
Top
Posts: 17
Joined: Tue Jul 07, 2009 7:46 pm
Location: Tin Can Bay

Post by nobbie »

what do you mean buy that? got any pics?
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

CAn you turn the shaft around like people do with the rear tail shafts when lifting the patrols so the skinny/slide bit is over the cross member
Top
Posts: 119
Joined: Wed Jun 17, 2009 6:20 pm
Location: Melbourne

crossmember

Post by Dyls GQ »

Doesnt get much simpler than this :D

If You Go Into The Members Forum And Check Out My Thread Theres More Photos

Image
Sure Could Go Some Side Boob Right Now
Top
Posts: 17
Joined: Tue Jul 07, 2009 7:46 pm
Location: Tin Can Bay

Post by nobbie »

cheers mate.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 49 guests