Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Group Buy: Maxi Xfer Gears **HOLY FARK - THERE'S 10**

Tech Talk for Rover owners.

Moderator: Micka

Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

Guys we really need to get the numbers up for this.

I spoke to Warren and he said that at 7 people the price would have to go UP by $200 each.

If you know someone that is thinking about getting them, convince them.

If you are reading this and thinking about getting some gears, then get on board. They will not be this cheap again.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Micka wrote:Guys we really need to get the numbers up for this.

I spoke to Warren and he said that at 7 people the price would have to go UP by $200 each.

If you know someone that is thinking about getting them, convince them.

If you are reading this and thinking about getting some gears, then get on board. They will not be this cheap again.
We are up to 8 now aren't we???

(from AULRO)
SSmith wrote:Deposit paid :twisted:
49% Simon
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

ISUZUROVER wrote:
Micka wrote:Guys we really need to get the numbers up for this.

I spoke to Warren and he said that at 7 people the price would have to go UP by $200 each.

If you know someone that is thinking about getting them, convince them.

If you are reading this and thinking about getting some gears, then get on board. They will not be this cheap again.
We are up to 8 now aren't we???

(from AULRO)
SSmith wrote:Deposit paid :twisted:
49% Simon
Um I count 9.

we got to late entrants from AULRO
Icefyre
SSmith

Current list;
buzz66 30% PAID in full cause we were all to slow
Micka 49% PAID
Grimace 49% PAID
jbell 49% PAID
halfshaft 30% PAID
isuzurover 30% PAID
revor 49% - Micka is sorting out payment for this
IceFyre (AULRO) - PAID
SSmith 49% - PAID
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

Still on 8, I'm afraid.

Revor has not gotten in touch with M.R. as yet.

I have just emailled him again so hopefuly I will hear back later today or tomorrow. I am seeing Warren tonight, so I'll tell him about the numbers being more like 8 or 9 and try to persuade him to keep the price as is.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I was just adding one to Micka's numbers... If buzz66 is counted then looks like 9!!! Only one more to go!!!
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

I still only count 8 :?

GoldRover was not included in the list of 10 - I wish he were now, though, cause that would give us 9 :roll:

I will ask Warren if that can change so we could be at 9 and just waiting on Keith.
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Micka wrote:I still only count 8 :?

GoldRover was not included in the list of 10 - I wish he were now, though, cause that would give us 9 :roll:

I will ask Warren if that can change so we could be at 9 and just waiting on Keith.
We are at 9 including Revor.
Without revor we remain at 8.

goldrover was never included int he list since he went and did his own thing.
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

Hey Guys

I am interested! Cant pay the deposit until next week though...and who do I pay?

Im in for the 49% gears. Now, how do I get the intermediate shaft out? Im a bit of tech dummy...

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

mcdisco wrote:Hey Guys

I am interested! Cant pay the deposit until next week though...and who do I pay?

Im in for the 49% gears. Now, how do I get the intermediate shaft out? Im a bit of tech dummy...

Angus
Great!!! Ring MR Automotive and pay them directly (mention the group buy). Contact details are 1 or 2 pages back.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

mcdisco wrote:Hey Guys

I am interested! Cant pay the deposit until next week though...and who do I pay?

Im in for the 49% gears. Now, how do I get the intermediate shaft out? Im a bit of tech dummy...

Angus
SWEET :armsup: :armsup:

That brings us to 9.

Keith most likely will be passing on the deal, so 9 might have to be the magic number.
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

Ok will do. I dont actually own the vehicle these would go into. Its a 110 single cab ute.

How would I find out what type intermediate shaft I have? If Im not ready to pull it out just yet, can I get them to make up the gears on a replacement shaft? Do I need to get under and work out the serial number?

Help with these questions would be great...


Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

mcdisco wrote:Ok will do. I dont actually own the vehicle these would go into. Its a 110 single cab ute.

How would I find out what type intermediate shaft I have? If Im not ready to pull it out just yet, can I get them to make up the gears on a replacement shaft? Do I need to get under and work out the serial number?

Help with these questions would be great...


Angus
MR Automotive need to modify the intermediate gear and need to know which dog teeth your low range gear has.

So ideally you need to send them your intermediate gear and low range gear.

Alternately, you can buy a new intermediate gear ~$500 and get that modified.

This has taken a while, and they probably won't do them all in one hit, so I am sure you will have plenty of time.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

Whats the chances of selling my intermediate shaft for the same money if I get them to modify one of theirs?

I just dont really wan the landy out of action while I wait for it.

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

mcdisco wrote:Whats the chances of selling my intermediate shaft for the same money if I get them to modify one of theirs?

I just dont really wan the landy out of action while I wait for it.

Angus
The approximate price I mentioned was a NEW intermediate GEAR. I am not sure how much a 2nd hand intermediate gear would be worth.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

Hmm...I guess MR could keep a hold of mine until Im ready to send them the shaft out of my tc.

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

Angus When you ring MR ask to speak to Warren and explain your dilemma.

They are really great to deal with and i am shore they will be able to help you in anyway they can.
To go the 49%gears it is not just a matter of swapping over the gears as there is some clearancing to be done inside the case to accomodate the larger gear.
Again speak to MR and they will help. You may be able to supply a down deposit and get a whole complete done case then have it shipped and once you swap it in then send them your old one then get down deposit back???
Anyways they will help.

Cheers Jamie
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

Cheers Jamie. I will give them a call during the week and work out whats possible.

Cheers

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

I spoke to Warren again today and if mcdisco pays his deposit this week, we will be at 10! :armsup:

Apparently there is another guy from Japan that has contacted M.R. and is included in the group buy. :armsup: :armsup:

Warren is just waiting on confirmation of the last 2 deposits and then we are good to go...finally.

Fingers crossed that it all pans out.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

We need EVERYONE that has paid a deposit to M.R. Automotive for the gears to contact them ASAP to confirm their deposit. Please have the details of when and how you made your deposit ready to confirm with Warren.

Also, can you please tell him your username on Outers so that I can cross-check with him about everyone that is involved.

Thank you.
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

GUys

I will pay as soon as I can, but I am waiting for the bank to sort out a loan. Its in their hands at the moment.

Will try to get it done asap. Still tossing up whether I got for 30% with 4.11's or just whack in 49% gears.

Hmm...

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I have confirmed my deposit with Warren and emailed my username.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

Hey all

The bank is stuffing around. Will take a little bit longer. Sorry to delay you guys as this has been going for a while...

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

You guys are going to hate me, but the bank (on which I was relying on for the loan) isnt playing ball for a while. Im going to have to pull out as I can commit to it now.

Big sorry guys.. :cry:

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

I'm confirmed, but Warren said only 6 have paid, so come on guys :!:
rover money pit on mogs !!!
Posts: 4
Joined: Thu Jun 11, 2009 9:59 pm
Location: perth/pilbara

Transfer gears

Post by halfshaft »

I spoke to Warren this morning and confirmed my deposit this morning.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

We are currently sitting on 8 confirmed deposits.
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Micka wrote:We are currently sitting on 8 confirmed deposits.
That's everyone at present accounted for I beleive. So we gonna have to pimp this out more!
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

So what's it gonna be, guys?

Do we just go ahead with 8 sets and hope for the best, pricewise?

Show of names...who's ready to go and who wants to wait a bit longer? Add to the list.

Micka - Ready when you are.
Posts: 4
Joined: Thu Jun 11, 2009 9:59 pm
Location: perth/pilbara

Post by halfshaft »

I am in no rush but if the majority want to go ahead then we should finish this thing off.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

There was someone else on AULRO interested.

I am in no rush, but happy to go ahead now if that is the group decision.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests