Hey all,
I'm chasing information about putting a 2 person seat in the rear of my Fj40.
i need info about what kind of seat i can use, seat belt mounting etc.
all help will be muchly appreciated.
Thanks
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
FJ40 rear seat
Moderators: toaddog, Elmo, DUDELUX
I made up a steel SHS subframe that bolted to the factory seat mounts in mine. The engineer said that if you wanted to weld plates in they had to be 100x100 (from memory so don't take it as gospel).
I used a Suzuki Vitara seat that had the belts and buckles mounted to the actual seat unit. Fitted snugly between the wheel arches. I've heard you can use Sierra rear seats also.
Speak to an engineer first though. They can tell you what's legal and what isn't. It shouldn't be that expensive to certify either.
I used a Suzuki Vitara seat that had the belts and buckles mounted to the actual seat unit. Fitted snugly between the wheel arches. I've heard you can use Sierra rear seats also.
Speak to an engineer first though. They can tell you what's legal and what isn't. It shouldn't be that expensive to certify either.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
awesome thanks for your help.v840 wrote:I made up a steel SHS subframe that bolted to the factory seat mounts in mine. The engineer said that if you wanted to weld plates in they had to be 100x100 (from memory so don't take it as gospel).
I used a Suzuki Vitara seat that had the belts and buckles mounted to the actual seat unit. Fitted snugly between the wheel arches. I've heard you can use Sierra rear seats also.
Speak to an engineer first though. They can tell you what's legal and what isn't. It shouldn't be that expensive to certify either.
Who is online
Users browsing this forum: No registered users and 2 guests