Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

I need a draglink

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 5
Joined: Mon Jul 28, 2003 1:16 pm
Location: Darwin, miles from anywhere else

I need a draglink

Post by mygqzy »

I have a GQ and went to pedders to get a wheel alignment the other day due to the dreaded shimy at 80km/hr. Had their saftey check done first.....

Needs-draglink, radius bushes, sway bar link, leading arm bushes and castor correction bushes due to 2inch lifted springs.

With alignment $1400.00!

They said that they can only get the draglink from Nissan $618.00.

Is there any kits out there that would have this stuff in it, mainly a draglink?
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

Mine did the same on the Maverick, but i foound a place the reco's them for about $50. It has done simpson crossing and hasn't fallen out yet. The place i went to was ww shock absorbers at Virginia Brisbane 07 32652133. THey may have a agent up there.

HOpe it helps
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Get a second opinion as Pedders are notorius for selling up on minor work
Take to a steering shop which is not part of a big chain and has a good reputation around the motor trade.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ring Mal Leslie at SG Leslie and sons in Heidelberg Melb. Makes just what you need.

Bazzle
;)
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests