Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux injecter pump lines 2.8

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 46
Joined: Thu Aug 14, 2008 10:49 pm
Location: gympie

hilux injecter pump lines 2.8

Post by _noddy »

Hey i need help . I pulled my injecter pump out to get reco and i didnt mark the injecter lines so witch lines go where so could some1 help me out its a 2.8 . chrees Noddy
Top
Posts: 5
Joined: Sun Jun 28, 2009 6:28 pm
Location: ipswich

Post by Team Slammer »

hey mate i have a 2.4 hilux so dont know if it will be the same,but looking from passenger guard at the pump the outside bottom is no 4 the top is no3 inside bottom is no 2 and inside top is no 1. hope this helps not 100% if pumps are the same.
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

...............
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Shouldn't be too hard to figure out.

Do an image search on Google. You may get lucky if you can't nut it out.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

well iirc if you get them the wrong way round ie 2 both pairs of 2 are clamped together 1 pair will hit the dipstick if this is the case its the wrong way round at the pump
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 46
Joined: Thu Aug 14, 2008 10:49 pm
Location: gympie

Post by _noddy »

clamps got pulled of them i took it in with the lines on it
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

Top inner is N01, then goes clockwise looking at it from the rear of the vehicle. Firng order is 1342.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 101 guests