hey guys,
just curious about celica motors that can bolt straight onto my lux gearbox
any help would be appreciated
as far as i can work out, the 18r is no good, and the 22r is no better
please help us out guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
89 4runner gearbox + celica motors
Moderators: toaddog, Elmo, DUDELUX
hey mate i put a 22re in my 4runner. it'll bolt straight up to a G52 or equivalent gearbox. they certainly have a lot more kick than the 22r's. I'm going to turbo mine soon as u can never have too much power. lol. If you have the money i recommend going straight to a V8, but if your on a budget like me, sticking a 22re in there is easy as piss. All u have to do is move engine mounts (simply bolt on/bolt off they are the same just in different positions on the engine in a celica), sumps, oil pickups i think that's about it trying to remember it all. lol. anyways its not hard at all, only about 4 wires u have to wire into the dash from the ECU and away you go. That being said i snapped a conrod in my first 22re, but it had done a fair few k's....
hope that kinda helps...
hope that kinda helps...
4 wires hey shnoz, theres more to it than that, it's still easy though, gotta change over the altinator, gotta wire up your gauges, then a couple of wires from the igniter to the ecu then 3 wires u gotta run from ecu to ign, start and batt+. its a piece of piss really just a pain pulling dash parts off to get to shit and mounting the ecu n shit. well if ya go with it ill send ya some instructions if ya want
Who is online
Users browsing this forum: No registered users and 6 guests