Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Custom Trailer Axle Using Vitara Axle

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 13
Joined: Thu Oct 06, 2005 7:26 pm
Location: Sydney

Custom Trailer Axle Using Vitara Axle

Post by machh1 »

Hi everyone. I have an old.. pretty old home made trailer I purchased recently which has combi 9inch hubs & wheels on a straight tube axle. Trailer itself is in pretty good condition. Would like some expertise on the following questions.

1. How hard would it be to make up a new tube axle using Vitara hub/stub axles?
2. Is it something that could be done at home for someone who has basic know how or is it a mechanic job?
3. Is there anybody in Sydney (westish) that would be able to do it?
4. Lastly, an idea of cost for either of the above mentioned methods of getting one made.

Any thoughts/comments appreciated.

Thanks.
60series diesel, unknown lift, ext shackles, front locker, 33" BFG muds..., sliders, turbo & usually dirt from last trip.
Downsized to stock 94 Vit wagon.
Top
Posts: 13
Joined: Thu Oct 06, 2005 7:26 pm
Location: Sydney

Post by machh1 »

Actually all Im after is to be able to use the same size rims on the trailer that I use on the vit. Any suggestions?
60series diesel, unknown lift, ext shackles, front locker, 33" BFG muds..., sliders, turbo & usually dirt from last trip.
Downsized to stock 94 Vit wagon.
Top
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

i'm sure you can get F-100 trailer hubs from somewhere which are the same bolt pattern as the suzuki's
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

atari4x4 wrote:i'm sure you can get F-100 trailer hubs from somewhere which are the same bolt pattern as the suzuki's
Yep. I run f100 trailer hubs on mie. Just go to your local trailer parts supplier and order your axle with 5x5.5" hubs at the same width as your vit and thats it!

Peter
[url]www.twinstickoffroad.com[/url]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 76 guests