Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

can i remove the catalytic converters

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

can i remove the catalytic converters

Post by peeko22 »

as the title says i got a rodeo 3.5 petrol 04 model and pretty sure i blew the cats....it sounds terrible.

can i just remove them and replace them with a bit of strait cos it would be heaps cheaper for me that way .... im in qld

thanks
Email - flossamarosus@hotmail.com
Posts: 118
Joined: Sun May 18, 2008 6:51 pm
Location: newcastle,nsw

Post by barnsy »

hey mate
dont know about qld but in nsw even if u hit the centre out and leave the cat in there its highly illegal and comes with a fairly hefty fine well over $1000 if im not mistaken. ide definatley be putting a new one in..
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

go for it. the fine is only 10G last time this thread came around. youll find you have most likely just broken a weld joining the cat/s to the exhaust pipe which is very common.

im no expert but how the hell do you blow a cat convertor?
turbos are nice but i'd rather be blown
Posts: 138
Joined: Sun Oct 10, 2004 6:16 pm
Location: northern rivers nsw

Post by bludnut »

chunderlicious wrote:go for it. the fine is only 10G last time this thread came around. youll find you have most likely just broken a weld joining the cat/s to the exhaust pipe which is very common.

im no expert but how the hell do you blow a cat convertor?

cold........ burns ya lips otherwise ;)
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

theres also been research done that proved the cat acutally did a lot of good for the performance of the engine etc... providing it was a hi-flow cat...

as for destroying it - i've killed one which had the ceramic centre - too many knocks on rocks and just general 4x4 vibrations made it fail... since replaced with the other type (platinum coated steel i think it is???) and no issues.

theyre also not really that expensive - and if the guy who's putting it in doesnt mind - you can ask him to weld it up so the cat is a clamp/bolt in replacement... not sure if its worth the hassle though - although one end of mine is like this to make removing the back end of the exhaust an easier job.
The worst thing about censorship is ███████.
Posts: 42
Joined: Mon May 11, 2009 5:13 pm
Location: gold coast

Post by superslowlux »

Sorry for the hijack, but my 2wd 05 3.5 rodeo has always seemed to be gutless for a v6, about to do 100k service, new plugs and valve adjustment should do the trick but was wondering if replacing the standard muffler/cat gives much improvement to around town performance?
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Qld is the same if you car comes with one it's illegal to not have one or to gut them. Probably illegal to run around with damaged one too the way they are these days. You would only have one I would expect as the factories generally only put twins in high performance twin systems like V8's. Check the price of performance aftermarket cats they have come dowm considerably in price over recent years and flow well. Don't put a factory one back in you will most likely remortgage your house to afford one.
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Probably throw engine codes too. This will lead the engine to run in "open loop" mode ("limp home") causing poor fuel consumption and poor performance.

The ceramic types can turn to dust from vibration and knocks, and be blown by exhaust gasses to block the remaining ceramic honeycomb near the outlet causing loss of performance (strangling the exhaust flow).

Regardless of the legalities, it just doesn't work to try to remove them permanently.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

A commodore/walker cat is only ~$100 new. You can buy a lot of them for the cost of the fine. You can also see straight through them. As mentioned they have little or no resistance to flow.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 139
Joined: Fri Apr 13, 2007 3:18 pm
Location: Melbourne

Post by 1TUFFGQ »

Hi flow cats are a waste of money. Just buy/fit one that is standard for your exhaust system. All the hi flows do is allow more sound through. So unless you run a turbo and need to open the system right up, don't waste your money.
And yes the EPA fine is huge for removing the Catalytic Converter.
GU Patrol intercooled TD42T, lifted, Cheezy sliders, ARB air locker, beadlocked Claws, Warn winch
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

Post by peeko22 »

no worris thanks for the help ..... i do have 2 but if they arent that expensive i'll get new ones .... my mate got 2 for his xr8 and said they were 300 bucks each andi thought stuff that i'll just put a pipe in ....looks like he got ripped off hehe
new ones it is


and to superslowlux i got a 2.5inch with a strait threw mufler and it made a bit of difference in power mainly more responsive than actual power i'll se what happens with these new cats i get too
Email - flossamarosus@hotmail.com
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

peeko22 wrote:no worris thanks for the help ..... i do have 2 but if they arent that expensive i'll get new ones .... my mate got 2 for his xr8 and said they were 300 bucks each andi thought stuff that i'll just put a pipe in ....looks like he got ripped off hehe
new ones it is


and to superslowlux i got a 2.5inch with a strait threw mufler and it made a bit of difference in power mainly more responsive than actual power i'll se what happens with these new cats i get too
When I priced cats for a research project that was about the price $100ish for a commodore, $300+ for a falcon of the same vintage.

If cats for your car are expensive, just find a cheaper one of the same size.

If the exhaust places want too much, you can buy them from repco or similar. The commo ones bolt in - so easy to DIY.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Post Reply

Who is online

Users browsing this forum: No registered users and 141 guests