anyone used/seen/heard about this type of GU4.2l 3" Dum

[pongo]

http://cgi.ebay.com.au/NISSAN-PATROL-GU ... .m14.l1262

any reports, Is it a real 3 inch. Its $100+ Cheaper than Denco ( who still have not returned my calls)

[fumduk3]

beauy exhausts in beaudesert have 3 " dumps for 200 or 220 bucks when i bought one a few months back mate. theres a pic somewhere on the forums with 3 dumps side by side, the beauy was apparently alot closer to 3 " than the other SUPPOSEDLY 3" dump. first pic showed how small the standard nissan one was. i measured mine when i got it and it was just under 3". only just

[Tomo_89]

hard to tell from that picture but i doubt it would be a true 3"i.d
Best way is to get a 3" mandrel 90 bend and a dump flange and make your own

[pongo]

beauy exhausts in beaudesert have 3 " dumps for 200 or 220 bucks when i bought one a few months back mate. theres a pic somewhere on the forums with 3 dumps side by side, the beauy was apparently alot closer to 3 " than the other SUPPOSEDLY 3" dump. first pic showed how small the standard nissan one was. i measured mine when i got it and it was just under 3". only just

Thanks for the great heads up. I actually found the pic using the search funtion for once.



Ill ring them monday and suss it out properly. AS its for a MQ SD33T, IF they make them there they may be able to modify it a bit. i ALso havent ruled otu the DIY option although i cant be farked

[nastytroll]

contact scotts rods at yamanto qld also.

[pongo]

i rang beaudesert today and they only do cast dumps for the low price of $280. They got shitty when i asked about them compared to the denco/mtq ones which are $60 cheaper.


Happy to pay extra If there better but prob all the same now.

Anyone know if the denco ones are the same or different?

http://www.dencodiesel.com/store/comers ... ategory=92

[Bad JuJu]

If your turbo is a T25/28 flange, check ebay for a sub-$100 rice burner dump pipe off a sr20 or similar?

eg http://cgi.ebay.com.au/Stainless-steel- ... 286.c0.m14