Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

carby for hillclimbs?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 47
Joined: Thu Jun 18, 2009 3:04 pm
Location: Bunbury

carby for hillclimbs?

Post by 350HJ75 »

hey guys a i have a landcruiser with a 350 chev, it has a 600 holley on it i have got the car recently and will be using it for offroad use mainly, i have the problem of the car not running when on steep angles and this is because of the carby is this correct? does anyone know a make of carby to suit the motor that will handle steep angles?
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

holley do one apparently
called truck avenger or somthing similar
or run it on gas wont matter about hills then
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I would go one on the throttle body EFI units ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 1039
Joined: Mon Mar 05, 2007 10:28 am
Location: On board the Mothership

Post by Harb »

Holley make an off road kit that sorts out all the problems that holley's have with angles.....

Speak to someone like the team at HUME PERFORMANCE in Sydney...they should be able to help you

http://www.hume.com.au/

look on the website under Speciality Carbs

http://www.hume.com.au/index.php?cPath=21_57_68

Image

But as sujested, Gas is a really good option if you want to get it really humming :)
Harb

http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Posts: 48
Joined: Wed Aug 12, 2009 8:50 pm
Location: townsville

Post by woodyjbh »

I have exactly the same issue as you and i've been informed by the good chaps at 'The Carby Centre' in Townsville that the 600 I'm running can be midified to suit the steep climbs we do. Apparently, its a fairly common mod and not that complicated to do.

Woody
Posts: 8
Joined: Mon Sep 26, 2005 5:20 pm
Location: Brisbane

Post by ROBZ »

I was going to put a Holley on My Patrol, but was informed they don't like anything over 15 degrees in incline. But I am interested in finding out about their offroad kit.
Posts: 1711
Joined: Mon May 10, 2004 7:19 am
Location: Kalgoorlie WA

Post by roverrat »

rochester ...
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!

http://www.outerlimits4x4.com/ftopic52067.php
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

Holly Truck Avenger is the offroad carby, works a treat, never missed a beat for me, plenty of nasty angles havnt bothered it and it doesnt flood when you hit a washout too hard either.

Thirsty little bugger though.

Catcha
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Posts: 362
Joined: Sun Jun 15, 2003 9:50 am
Location: Melbourne

Re: carby for hillclimbs?

Post by amtravic1 »

350HJ75 wrote:hey guys a i have a landcruiser with a 350 chev, it has a 600 holley on it i have got the car recently and will be using it for offroad use mainly, i have the problem of the car not running when on steep angles and this is because of the carby is this correct? does anyone know a make of carby to suit the motor that will handle steep angles?

A quadrajet will solve your problems.
www.amtra.com.au
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Re: carby for hillclimbs?

Post by CWBYUP »

amtravic1 wrote: A quadrajet will solve your problems.
If you have some one that can tune it properly.

Otherwise your in trouble.

To many people stuff these carbs up because the think they can tune one.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

running a scavenged floatless bowl will solve the problem
http://www.mothfukle-engineering.com/
Posts: 56
Joined: Wed Feb 01, 2006 8:18 pm
Location: Gladstone, Queensland

Post by Timmeh »

how does a scavenged floatless bowl work? What is required to set one up?
Redline is made for a reason!!
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

no floats
you run a stand pipe in the bowl to set the fuel hight that pipe is conected to a fuel that pulls from the bowl and return to the tank.
you fit a jet where the needle and seat used to be that is sized to only let enough fuel in to give the engine enough to run at full power.

here s one i did useing a 32/36 weber on 1.6 zook engine.

http://www.outerlimits4x4.com/ftopic139 ... highlight=
http://www.mothfukle-engineering.com/
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Re: carby for hillclimbs?

Post by PGS 4WD »

amtravic1 wrote:
350HJ75 wrote:hey guys a i have a landcruiser with a 350 chev, it has a 600 holley on it i have got the car recently and will be using it for offroad use mainly, i have the problem of the car not running when on steep angles and this is because of the carby is this correct? does anyone know a make of carby to suit the motor that will handle steep angles?

A quadrajet will solve your problems.
I tend to disagree

Stick with the Hollet truck avenger, a quadrajey has small fuel float chambers that have been known to give issues on fast drag cars on the flat, forget about angles.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 47
Joined: Thu Jun 18, 2009 3:04 pm
Location: Bunbury

Post by 350HJ75 »

cheers for the reply's guys lots of helpful info, does anyone know where i can get my hands on a truck avenger? im thinking second hand in wa cos they are just a bit too dear new atm
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 47
Joined: Thu Jun 18, 2009 3:04 pm
Location: Bunbury

Post by 350HJ75 »

cheers for the help guys im looking into modifying my holley i have now there is a few things i can try that are a bit cheaper than a new carby so will see how i go
Posts: 50
Joined: Sat Dec 20, 2008 8:29 pm
Location: Nowra, nsw

Post by Toyo80 »

Would a electronic fuel pump work? The Carbi Toyota's have a mechanical pump & in my way of thinking would not be pumping enough fuel into the carbi at low rpm (when climbing etc).

I am almost willing too give it a go & use a switch to turn it on as i climb...I wonder?
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Can't you just have a lift pump feed the mechanical pump??
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 35
Joined: Sat Mar 24, 2007 5:04 pm
Location: yea vic

Post by tuff6ty »

go the holley avenger just put one on my bros 75 runs way better than the gas research
cheers nathan
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

tuff6ty wrote:go the holley avenger just put one on my bros 75 runs way better than the gas research
cheers nathan
Who tuned the Gasresearch? Usually the reverse is true, particularly on hills. A single Gasresearch will limit peak power on an engine over 5.0L, twins are required, the Gasresearch carbies are flowed the same as Holley.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

350HJ75 wrote:cheers for the reply's guys lots of helpful info, does anyone know where i can get my hands on a truck avenger? im thinking second hand in wa cos they are just a bit too dear new atm
i doubt you'll find second hand truck avengers.
http://www.mothfukle-engineering.com/
Posts: 56
Joined: Wed Feb 01, 2006 8:18 pm
Location: Gladstone, Queensland

Post by Timmeh »

I have been told to get centre hung float bowls as they have a bigger float and don't get as affected by angles as side hung floats, and also to keep an eye on your fuel pressure, keep it around 4.5 to 5psi.
Redline is made for a reason!!
Posts: 50
Joined: Sat Dec 20, 2008 8:29 pm
Location: Nowra, nsw

Post by Toyo80 »

Do you think it's starving for fuel or flooding? I tend to think my one is now flooding due to all the black smoke that comes out when started.
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Post by GUtripper »

Good luck getting a 2nd hand truck avenger, i looked for ages to no avail.
you could get a 2nd hand one from US fleabay, but its pot luck on what turns up in the mail.

They are made in a 470cfm, 670, and 770
Part no's are hly-0-90470, hly-0-90670, and hly-0-90770. Any aussie holley dealer will be able to get them for you.

Your options are:
buy one new in AUs, will prob be a special order though. I got a 470 recently from Extreme motorsports in Qld (Hunter Racing) for about $500 incl freight etc. It took a week to arrive at my door.

buy a new one yourself from US ebay, may get it cheaper, but then if there are warranty or other issues it will cost you more in the long run.

I have seen them running on sbc's etc off road, they work a treat. Yeah the 670 and 770 will suck juice, but if you're running a v8 offroad why go the bigger ones? Unless youre racing/comp and want a screaming top end, what you really want is strong bottom and mid range, so go the 470.
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

if all you want from the truck avenger is the flood reduction stuff, you can build that stuff into any side hung holley bowl.

simply fit well sealed vent whistles and use some 8mm rubber hose to mimic the 'cross over vent'. then just run a slightly low float level and slightly low fuel pressure.
http://www.mothfukle-engineering.com/
Posts: 47
Joined: Thu Jun 18, 2009 3:04 pm
Location: Bunbury

Post by 350HJ75 »

cheers for all the comments guys, at the moment i have the details for converting my holley into an offroad one as chevlux has explained, but i am going through the process of getting my engine engineered and am unsure if i can run it on fuel as the engine is older than the car and may need to go gas so will see what the authorities say!
Posts: 35
Joined: Sat Mar 24, 2007 5:04 pm
Location: yea vic

Post by tuff6ty »

you can get them from vpw in melbourne they were $1 per cfm
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

tuff6ty wrote:you can get them from vpw in melbourne they were $1 per cfm
thats a 'tad' :roll: over priced if you want a 670 or a 770, cheap at the current wholesale prices for a 470 though.
http://www.mothfukle-engineering.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests