Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

g13b sierra, dizzy cap hitting firewall

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 25
Joined: Mon Jun 08, 2009 9:19 am
Location: SA

g13b sierra, dizzy cap hitting firewall

Post by zookfun »

Im just putting a g13b into a sierra, Ive made up the mazda dizzy cap with the leads coming out sideways but its hitting the firewall and its still a cm until the gearbox is touching the motor..
What is going on?

Image Image

Image Image
Top
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

I believe your firewall could benefit from a few taps with a gentle persuader.

nic
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

hammertime
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

are you putting it into a 1ltr chassis and have used the same mounts?
cheer up emo kid
Top
User avatar
UBZ
Posts: 16
Joined: Tue Jan 29, 2008 10:04 am
Location: NZ

Post by UBZ »

you can slot the engine mounts a little to move the engine forward a tad.

BFH on the firewall , but might pay to check how much clearance their is between the firewall and internal heater unit before you start bashing.. :?

Then hope you never need to get the dizzy cap off :bad-words:
Top
Posts: 25
Joined: Mon Jun 08, 2009 9:19 am
Location: SA

Post by zookfun »

zook4fun wrote:are you putting it into a 1ltr chassis and have used the same mounts?
Its the 1.3L chassis.
I have used the sierra mounts that connect to the body and the engine but used the commodore rubber bit in between which wouldn't change the position of the engine backwards and forward.
:?
Top
Posts: 25
Joined: Mon Jun 08, 2009 9:19 am
Location: SA

Post by zookfun »

might have to give it a bit of a hit- I'll check how much room I have with the heater core..

Unless someone wants to make me a right angle adaptor with the g13a cam/right angle and g13b dizzy?!@
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

So in that pic is the gearbox at its final mounting position? Ie the gearbox mount is aligned with the chassie?
Top
Posts: 25
Joined: Mon Jun 08, 2009 9:19 am
Location: SA

Post by zookfun »

I just found out the gearbox mount was completely broken which means the gearbox dropped at the back which brought the top of the engine close to the firewall. I pulled the engine out and banged the firewall a little bit but it still looks stock. Now I have a fair bit of room. Cheers
Top
Posts: 6
Joined: Sat Mar 01, 2008 5:58 pm
Location: waihi newzealand

Post by gtizuk »

Why dont you just do this ??

Image
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests