Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Purchasing a 2000 Jak TDI, any tips?

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 146
Joined: Fri May 21, 2004 2:07 pm
Location: Sydney North

Purchasing a 2000 Jak TDI, any tips?

Post by Brunsy »

gday,
im getting myself a fourby again, gone is the lifted chopped and grubby GQ shorty. Wife says i can get somthing niceish. Well the jacks look like surpringly good value. I imagine the Isuzu is a fairly good motor, im looking at getting one with no more than 200K. What sort of life do these engines/gbox have if treated well? any tips or advice woul be much appreciated.

Brunsy
GU TB45 tractor
Posts: 51
Joined: Sun May 21, 2006 3:25 pm
Location: Ipswich

Post by buddah_04 »

if its a 3l td, DONT, i work for holden, there hard to get parts for, most parts have become obsolete, even being up to 2004, they have prob with injectors, injector harnes, rail oil pres sensors and ecms, just the main few anyway.
Posts: 62
Joined: Fri Sep 22, 2006 10:09 am

Post by Havabigjuan »

mate had one but it had low k's (i mean 43k when he got it)and it was an awesome truck

problem with them is alot of the engine runs off oil pressure and they NEED good oil up to them constantly otherwise it is the begining of the end

as with above comment, I knew they had injector seal problems and a recall on injectors

find a 3.1 litre diesel, not as powerful but more reliable from what I gather
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests