Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
well my hubs have been butchered by the previous owner, somehow (they're missing internal parts and don't engage, ring gear still good though)
so i need 2 new ones before I can start going offroad, and was wondering if you guys have any experience with these: http://cgi.ebay.com.au/TOYOTA-HILUX-FRE ... 286.c0.m14
I'm kinda warey cause they look too cheaply made to last :/
could I replace the ring gears in these with the ones I already have and it'd all work?
car is a hilux solid front 1986
ta;
keith.
craz3d wrote:well my hubs have been butchered by the previous owner, somehow (they're missing internal parts and don't engage, ring gear still good though)
so i need 2 new ones before I can start going offroad, and was wondering if you guys have any experience with these: http://cgi.ebay.com.au/TOYOTA-HILUX-FRE ... 286.c0.m14
I'm kinda warey cause they look too cheaply made to last :/
could I replace the ring gears in these with the ones I already have and it'd all work?
car is a hilux solid front 1986
ta;
keith.
im not sure on those free wheeling hubs, but i have AVM hubs and i wouldn't recomend them to anyone, they constantly leak and the O rings keep breaking, the screws snap driver bits too easily.
What bits are they missing? There is not much too them bar the springs, a plate and the hub gear. If the springs are still there they may have just put them back incorrectly which I have seen before.
(they're missing internal parts and don't engage, ring gear still good though)
