Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mines mounted under the drivers seat, with the factory tool kit.
With a tree trunk protecter and snatch strap under the passenger seat.
All worked well until the ARB Comp (old one) broke the shaft off the motor (anyone know if these can be rewelded??).
Passenger side, in the corner of the firewall and the inner fender, bolted to the inner fender.. This is the preferred position for most ARB fitters, as it works well with the looms. You will need to move the vacuum tank (if fitted) for the clutch.
