Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Securing handbrake cable with non factory trailing arms

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 208
Joined: Sun Jul 25, 2004 7:35 pm
Location: Brisbane

Securing handbrake cable with non factory trailing arms

Post by striped tomato »

I have just replaced the lower rear trailing arms (control arms) on my 2003 GU Petrol. The handbrake cable was attached to the original trailing arms by a bracket that was welded on, i think it was to secure the cable and also prevent it frm getting nipped against the chassis when the wheels are articulating. What has anone else done to secure the handbrake cable when replacing the factory arms? Photos would be really appreciated.

Cheers

Steve

<Cross posted to Patrol4x4>
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Worm Drive Hose clamps, the cheapy ones.
Don't over tighten
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

I usually weld a nut onto the arm then bolt a clamp onto that.. i will have pics somewhere if you want..

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests