Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

plumbing up snorkel

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 240
Joined: Thu Dec 25, 2008 9:48 am
Location: Melbourne

plumbing up snorkel

Post by GU-ish »

hey all
changing my standard nissan snorkal to a stainless one.
wondering how people have plumbed it up once in the gaurd?

i dnt wish to use wat is already there from the standard one, as i have seen it before and didnt like it + i want a good join onto the airbox unlike the standard nissan one.

i assume flexi hose? and was wondering if anyone has used solid pipe in there with rubber joins?

thanks
chris.
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

Silicon hose
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

Image
Image
Image
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Posts: 14
Joined: Sun Nov 14, 2004 12:11 am
Location: Winnipeg, Canada

Post by MarkR »

Hi GQ351,

What are the inner & outer diameters of the pipe of your snorkel?
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

MarkR wrote:Hi GQ351,

What are the inner & outer diameters of the pipe of your snorkel?
hey chris how are you mate?
all the stainless piping is 4'' inches in diamiter, & about 2mm thick..
good luck with it all!!!
cheers jess...
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Posts: 14
Joined: Sun Nov 14, 2004 12:11 am
Location: Winnipeg, Canada

Post by MarkR »

Thanks GQ351 - where did you find a snorkel head with a neck that fits a 4" tube? All I've been able to find so far are the massive heads for big rigs with 6"+ necks or the ones from Safari with the skinny 2.5" necks.
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

Donaldson make the 4" heads/rams. I am fabricating mine at the mo and the 304SS 4" pipe's wall thickness is 1.6mm. even thats $65.00 a meter!

Donaldson also do the water seperator valves for the airbox and all the elbows.

good luck
GQ with 30 PSI of TD42T.........
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

MarkR wrote:Thanks GQ351 - where did you find a snorkel head with a neck that fits a 4" tube? All I've been able to find so far are the massive heads for big rigs with 6"+ necks or the ones from Safari with the skinny 2.5" necks.
no worries mate!! yeah i got mine from a place called coburg truck parts in vic, $45 bucks, maybe just try a truck joint in your area might have some luck hopefully?? :)
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Posts: 14
Joined: Sun Nov 14, 2004 12:11 am
Location: Winnipeg, Canada

Post by MarkR »

Thanks. Have sent Coburg truck parts an email. I do have a Donaldson catalog, but all of their air ram snorkel heads that are listed have 6" or greater inlet diamters.
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

Gudday

they do a 4" ....here's the info

Donaldson 4" Ram part number #H008154

regards

http://www.qds.com.au/downloads/PRODUCT ... inlets.pdf
GQ with 30 PSI of TD42T.........
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Post by bilby »

VN air intake pipe with the bends cut off will give you the straight sections ;)
just a little left of insanity :)
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Post by biggsy »

Image
Image
v8-gq
Posts: 396
Joined: Mon Dec 08, 2008 8:17 pm
Location: elimbah,qld

Post by 83-mud-lux »

can someone tell me where you get those black silicone bends please?

looking at making a 4'' stainless snorkel for my 4b but cant find bends anywhere..

i can only find blue intercooler pipe but i want black instead of blue.

help would be appreciated thanks.

chees..smiley..
1991 2.8 turbo,ruf,patrol rear springs,inverted 14'' bilsteins,33's,rear locker,winch,sliders plus more...

TUFF MUD 4X4 CLUB!! RIDIN IT DIRTY
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

try truckline or a truck shop
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests