Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wats the difference, jimny/coily??
wats the difference, jimny/coily??
im jus curious if u could use jimny springs in the coily, the make 80mm lift springs for a jimny and i can only find like 35mm for the sierra coily
The springs aren't the reason why there's only a 35mm kit for coil sierras.
The front end of coil sierras has many design compromises, least of which is a very short and small diameter shock. Caster is also an issue.
Basically, if you want more than 35mm of lift and any sort of travel in the front and of a coiler, an almost complete redesign is required - to say nothing of the back, which has its own quirks.
The thing is, there's no need to run more than 35mm of suspension lift in a coiler - with a BL and some bumpstop spacing, you can comfortably run a 31" tyre on a coiler with this much lift, and that's the limit of what the front end can handle anyway from a strength point of view, and the easy limit of what can be geared.
If you are able to handle the fabrication involved in fixing the front end, what springs you end up using are the easy bit.
Steve.
The front end of coil sierras has many design compromises, least of which is a very short and small diameter shock. Caster is also an issue.
Basically, if you want more than 35mm of lift and any sort of travel in the front and of a coiler, an almost complete redesign is required - to say nothing of the back, which has its own quirks.
The thing is, there's no need to run more than 35mm of suspension lift in a coiler - with a BL and some bumpstop spacing, you can comfortably run a 31" tyre on a coiler with this much lift, and that's the limit of what the front end can handle anyway from a strength point of view, and the easy limit of what can be geared.
If you are able to handle the fabrication involved in fixing the front end, what springs you end up using are the easy bit.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest