Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
has any body put a cj body on tj chassy
Moderator: GUtripper
has any body put a cj body on tj chassy
i want to no if any one has put a cj7 or a cj5 body on a wragler chassy any help would good.
Not the tub that I am aware of - but I have seen the front clip swapped over.
Personally I think this makes more sence if possible as the TJ Tub offers a few benefits over the CJ (galvanising/better paint/wider rear wheelweels).
The basic dimensons of the tib are very very similar - although the chassis is a bit different in shape, I think it could work fairly easily. ... Biggest issue I can think of is "offically" the chassis is what determines the year model - so that means you'd need to comply with TJ ADR's (possibly).
Personally I think this makes more sence if possible as the TJ Tub offers a few benefits over the CJ (galvanising/better paint/wider rear wheelweels).
The basic dimensons of the tib are very very similar - although the chassis is a bit different in shape, I think it could work fairly easily. ... Biggest issue I can think of is "offically" the chassis is what determines the year model - so that means you'd need to comply with TJ ADR's (possibly).
Cheers [url=http://www.wooders.com.au]Wooders[/url]
thanks im going to put a gen 3 ls1 into it. i want to do sum thing a bit difront from the pack.Wooders wrote:Not the tub that I am aware of - but I have seen the front clip swapped over.
Personally I think this makes more sence if possible as the TJ Tub offers a few benefits over the CJ (galvanising/better paint/wider rear wheelweels).
The basic dimensons of the tib are very very similar - although the chassis is a bit different in shape, I think it could work fairly easily. ... Biggest issue I can think of is "offically" the chassis is what determines the year model - so that means you'd need to comply with TJ ADR's (possibly).
LOL I'm not sure I'd say fitting a chevy 350 into a Jeep is really being different from the pack......... Examples of things that are different are:
Buick 455, Cummins 6BT, Lexus, Powerstroke, Rotary heck even an AMC401 would be "different" but not a chevy .....
No offense to the chevy as it IS a good donk - just that I would not use the word different
Buick 455, Cummins 6BT, Lexus, Powerstroke, Rotary heck even an AMC401 would be "different" but not a chevy .....
No offense to the chevy as it IS a good donk - just that I would not use the word different
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Who is online
Users browsing this forum: No registered users and 0 guests