Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gal dipping in Bayswater vic

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

Gal dipping in Bayswater vic

Post by ash_on_mtb »

Need a ski pole and mount hot dipped, anyone know of someone doing decent priced work ;) work in Bayswater area?

Cheers,
'97 HDJ80 - worth the wait
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

not sure if they do gal,big zinc on caterbury rd up past pick-a-part on the left. (just about before the garden supply joint)
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 17
Joined: Fri Aug 22, 2008 8:10 pm
Location: MELBOUNRE

hot gal

Post by gungu »

GB Gal are on Gatwick Rd bayswater which is between Dorest and colchester rds
Top
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

GB

good work, good on price all the stuff I make at work that is Gal'd goes to GB galv in dandy but im sure basywater is as good :D
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Same area, any recommendations on chrome plating (bumpers, trim etc)?
This is not legal advice.
Top
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

Post by ash_on_mtb »

whilst they look like they have enough money already, I'm sure a tiny little job like mine could be done quick and well, so I'll try GB - thanks for the tip, 'ppreciate it.
'97 HDJ80 - worth the wait
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

chimpboy wrote:Same area, any recommendations on chrome plating (bumpers, trim etc)?
Anyone got any suggestions? I've got two old-school chrome bumpers and a few bits of random trim that need attention.
This is not legal advice.
Top
Posts: 1293
Joined: Sun May 01, 2005 10:28 pm
Location: Ferntree Gully

Post by Bluefreak »

chimpboy wrote:
chimpboy wrote:Same area, any recommendations on chrome plating (bumpers, trim etc)?
Anyone got any suggestions? I've got two old-school chrome bumpers and a few bits of random trim that need attention.
Mate in Bayswater was looking to get a 66 mustang bumper rechromed - turned out to be cheaper to import a reproduction job from the states...
I wish my lawn was EMO, then it would cut itself...
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Bluefreak wrote:
chimpboy wrote:
chimpboy wrote:Same area, any recommendations on chrome plating (bumpers, trim etc)?
Anyone got any suggestions? I've got two old-school chrome bumpers and a few bits of random trim that need attention.
Mate in Bayswater was looking to get a 66 mustang bumper rechromed - turned out to be cheaper to import a reproduction job from the states...
lol really? Sheesh, that's not good.
This is not legal advice.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

chimpboy wrote:
chimpboy wrote:Same area, any recommendations on chrome plating (bumpers, trim etc)?
Anyone got any suggestions? I've got two old-school chrome bumpers and a few bits of random trim that need attention.
we use this place:

http://www.masterelectroplating.com.au/

Bazzle
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest