Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wiring in a tacho

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Wiring in a tacho

Post by Jonezy01 »

Were are they normaly wired to every one i talk to says into the back of the alternator is this right, and can the average DIYer do this from home or is it better left to the auto electrician.
\
Cheers Jonezy
Top
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

Wiring into the alternator won't work at all.

What type of car are you looking at wiring it into?
Top
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Post by Jonezy01 »

80 series cruiser
Last edited by Jonezy01 on Wed Oct 21, 2009 5:14 pm, edited 2 times in total.
Top
Posts: 50
Joined: Sat Dec 20, 2008 8:29 pm
Location: Nowra, nsw

Post by Toyo80 »

Petrol or diesel? For petrol it runs off the coil.
Top
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Post by Jonezy01 »

Turbo Diesel
Top
Posts: 113
Joined: Wed Mar 14, 2007 7:58 pm
Location: Canberra

Post by garrycol »

[quote="Matt_85Lux"]Wiring into the alternator won't work at all.

[/quote]

Yes it will.

Many cars, particularly diesels have the tacho running off the alternator.

Garry
Garry
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

garrycol wrote:
Matt_85Lux wrote:Wiring into the alternator won't work at all.
Yes it will.

Many cars, particularly diesels have the tacho running off the alternator.

Garry
x2
All my tacho's on the diesels I've owned have run off a alt winding.

And yes, unless you know what you are doing, just pull the alt and take it to the sparky to connect. I'd get them to give the alt a once over while there with new bearings etc while at it.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 20 guests