Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Magna V6

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Magna V6

Post by dumbdunce »

apologies for non-4WD related posting.

friend has a 1999 TH magna 3.5 V6 which has slipped a timing belt. the question is, is this an interference engine? it still turns over on the starter and makes no bad noises. when it gave up, there were no bad noises, clunks or bangs, it just stopped. I think it is a 6G74 engine, not 100% sure.

second question, are these engines available as a low km jap import? he has been quoted $5000 - $6000 for a replacement reconditioned engine. understandably he feels that this may be excessive.

any insights welcome. thanks.

DD
Free air locker to the first 20 callers!
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

3.5 V6 is the 6G74, and is (AFAIK) an interference engine. However, I don't know how many teeth can be jumped before problems begin.

Not sure about the Jap import question - I thought the Magna V6 engines were built at Lonsdale (in Adelaide.)

$5k - $6k sounds expensive; I'm fairly certain the Paj version is significantly cheaper ($3k - $4k), and Paj owners have made the Magna V6 fit the Pajero, so it should go the other way too. About everything other than the short motor needs to be swapped, but it's possible.
Top
Posts: 75
Joined: Fri Mar 20, 2009 3:11 pm
Location: Adelaide

Post by steverisingsun »

Good low K Aussie motors are between $500 to $1000 in the wreckers.
Steve
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

thanks for the info chaps.

any ideas where to get one in Sydney?
Free air locker to the first 20 callers!
Top
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

Post by date »

Look on ebay.com.au under "Magna Engine". Also, go to a local wrecker who has a hotline - they can get in touch with wreckers all over Aust.
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

just jap $450 with 3 month warranty $550 6 months warranty. :cool:
Free air locker to the first 20 callers!
Top
Posts: 23
Joined: Fri Feb 06, 2009 6:28 pm
Location: Albury

Post by epitrochoid »

A friends 3.5L magna had the hydraulic tensioner fail and the cambelt jumped 2 teeth. He had the belt and tensioner replaced and engine ran fine.

REgards

Epitrochoid
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest