Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5 speed behind 15B

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

5 speed behind 15B

Post by Frankenyota »

Am looking at getting a BJ40 late '79 with 4 speed.
Want to build a 15B and run a H55F 5 speed.

What i would like to know is can i use the bell housing and input shaft from the 4 speed and fit it to the 5 speed?

Cheers
Matt
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Hasn't anyone put a 5 speed behind a 3B to replace there 4 speed?
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

bellhousing will work

the input shaft i'm not sure on, but you could use the 5 speed input shaft from the 5 speeds that came behind 3b's
Spit my last breath
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Was told they were the same input shaft but thought some else may know for sure.
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

fairly certain its the same, might even be the same input shaft for the 1hz!

does the 15B have the same bellhousing or similar?
hands and mums dont count!!!
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

i vaguely remember hearing you need a clutch from a Dyna to make it work. Someone has done this before on this board.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Don't have the bellhousing from the 15B dyna.
It is a two piece set up.
Hoping i can use the bellhousing and starter from the B motor?

Matt
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest