Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Boost for 1HZ
Moderators: toaddog, Elmo, DUDELUX
Boost for 1HZ
Hi guys,
how much boost can a 1HZ handle and be reliable still.
Im looking at bolting on a turbo and intercooler on my 1HZ 80 series,
and would like to know if 12 psi or 15 psi is still ok for this engine.
I will be running a GT28 Disco potatoe roller turbo.
how much boost can a 1HZ handle and be reliable still.
Im looking at bolting on a turbo and intercooler on my 1HZ 80 series,
and would like to know if 12 psi or 15 psi is still ok for this engine.
I will be running a GT28 Disco potatoe roller turbo.
Gone to the Dark Side
Re: Boost for 1HZ
I was running 14lb in a 1Hz (Thanks to a well-known and litigious southern highlands diesel mechanic who installed a DTS kit with spacers on the wastegate to increase the boost without telling me) and it split every piston and 5 out of 6 preco chambers.gqmad wrote:Hi guys,
how much boost can a 1HZ handle and be reliable still.
Im looking at bolting on a turbo and intercooler on my 1HZ 80 series,
and would like to know if 12 psi or 15 psi is still ok for this engine.
I will be running a GT28 Disco potatoe roller turbo.
I wouldn't go over 9-10lb in a 1Hz if you want a reliable motor.
Jamie Benaud
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
turbo
thanks horndog..
The head has just been done so im leaving the motor alone.
Im leaning toward custom manifold and a GT 28 roller turbo.
3" right through is a must so i will be doing that also my truck has a safari snorkel, i was wondering if it would make a difference to ditch the safari snorkel and do a custom 4" snorkel.
Im hoping to get around 130kws at the wheels without doing the pump
The head has just been done so im leaving the motor alone.
Im leaning toward custom manifold and a GT 28 roller turbo.
3" right through is a must so i will be doing that also my truck has a safari snorkel, i was wondering if it would make a difference to ditch the safari snorkel and do a custom 4" snorkel.
Im hoping to get around 130kws at the wheels without doing the pump
Gone to the Dark Side
not sure about the snorkel but i know the safari ones are way better than stock that's for sure on my 75, pulled mine off to reseal the joint and it is crap will be getting rid of that very soon, on the 80s my mates seems pretty big that would allow good flow but wouldnt compete with 4inch and if your chasing decent power it wouldn't hurt. let us know how the roller turbo goes i have a safari kit atm and it seem ok but interested in the roller
Mine is running 13 pound, no intercooler. Got a 3inch straight though! I havent had a problem with it. Been running up around 11- 12 pound for the last 50 000. Haven't had a problem. Boost has gone up since the new exhaust!! Will be looking at a intercooler soon and winding the boost up to around 15pound. Running all through a stocko 1hz head!
1996 HZJ75RP, DTS turbo with 3inch exhaust, rear locker, MTZs, 2inch shackles, 2 inch custom packs!
dont safari kits run rollers???horndog wrote:not sure about the snorkel but i know the safari ones are way better than stock that's for sure on my 75, pulled mine off to reseal the joint and it is crap will be getting rid of that very soon, on the 80s my mates seems pretty big that would allow good flow but wouldnt compete with 4inch and if your chasing decent power it wouldn't hurt. let us know how the roller turbo goes i have a safari kit atm and it seem ok but interested in the roller
also im going to do mine as well, any reson why you will go the disco potato over say a GT2876r? i know those turbos go well on troles and i figured it would go good on a 1HZ as well.
i also have a friend who had an 80 series running 18 psi out of a 450 000 old motor, but his is cooled and he watches the temps, but i think he will de boost it soon.
i wish they are a garret turbo but not a rollerduck wrote:dont safari kits run rollers???horndog wrote:not sure about the snorkel but i know the safari ones are way better than stock that's for sure on my 75, pulled mine off to reseal the joint and it is crap will be getting rid of that very soon, on the 80s my mates seems pretty big that would allow good flow but wouldnt compete with 4inch and if your chasing decent power it wouldn't hurt. let us know how the roller turbo goes i have a safari kit atm and it seem ok but interested in the roller
also im going to do mine as well, any reson why you will go the disco potato over say a GT2876r? i know those turbos go well on troles and i figured it would go good on a 1HZ as well.
i also have a friend who had an 80 series running 18 psi out of a 450 000 old motor, but his is cooled and he watches the temps, but i think he will de boost it soon.
Boost does not kill a diesel engine... EGT's kill a diesel engine.
I run 15-20psi on my stock 07 1hz motor, 3" exhaust, good engine cooling system, minimal fuel increase (for now), no intercooler (for now).
I get 120kw and 450NM on 37' tyres.
I run 15-20psi on my stock 07 1hz motor, 3" exhaust, good engine cooling system, minimal fuel increase (for now), no intercooler (for now).
I get 120kw and 450NM on 37' tyres.
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
turbno
I have decided on the disco potatoe as i have used one of these on a GQ and it worked a treat it comes on boost froom almost idle and is full boost around 1600 rpm.. Also has heaps up top as wel. With the pump tricked up i was getting around 165kws at the rears with 35" tyres on the troll with this set up.
I was hoping to try do similar on the 1HZ less the pump mods for now i guess.
I guess all this said and done it sounds like i should be safe to run around 12-13 psi boost with a intercooer as long as i have a pyro and i keep an i on the temp..
I will keep you guys informed but i think i will run the disco potatoe with front mount intercooler and 3" straight through pipes.
I was hoping to try do similar on the 1HZ less the pump mods for now i guess.
I guess all this said and done it sounds like i should be safe to run around 12-13 psi boost with a intercooer as long as i have a pyro and i keep an i on the temp..
I will keep you guys informed but i think i will run the disco potatoe with front mount intercooler and 3" straight through pipes.
Gone to the Dark Side
Re: Boost for 1HZ
Got me beat how that tosser is still in business. He charged me big dollars to stuff my Hilux up well and truely and had it go from 9L/100km to 15L/100km on highway speeds. Paid again to have the pump done locally and back to normal just as much power. The local bloke took me out the back and said "Mate there's 1/2 million dollars worth of equipment here, think I would have bought it if you could do a pump without it"AustImages wrote:(Thanks to a well-known and litigious southern highlands diesel mechanic who installed a DTS kit with spacers on the wastegate to increase the boost without telling me)gqmad wrote:
DP Chip also put out a statement at one stage distancing themselves from that person. Dont know if they still do.
If your reading this Mr Highlander GO BACK TO SCHOOL
The bloke I had in Penriff was excellent and I recommend him. P.M if you want his details
Re: turbno
the 1HZ is no where near as strong as the nissan motor in the head department dont get too excited it will end in tearsgqmad wrote:I have decided on the disco potatoe as i have used one of these on a GQ and it worked a treat it comes on boost froom almost idle and is full boost around 1600 rpm.. Also has heaps up top as wel. With the pump tricked up i was getting around 165kws at the rears with 35" tyres on the troll with this set up.
I was hoping to try do similar on the 1HZ less the pump mods for now i guess.
I guess all this said and done it sounds like i should be safe to run around 12-13 psi boost with a intercooer as long as i have a pyro and i keep an i on the temp..
I will keep you guys informed but i think i will run the disco potatoe with front mount intercooler and 3" straight through pipes.
the precom chambers swell and contract at a diferent rate to the head cracking them selves then the head
most people dont realise anything is wrong till its too late
even then the engine will run fine make power etc then maybe just start to over heat on hills etc
i think 95% of 1hz turbo's out there if the head was pulled off then they would find cracked precom chambers and if left head cracks as well
best to get a 1hdt no precom chambers and direct injection stronger pistons ,conrods bla bla
play with that it will love it
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
Re: turbno
any ideas on the front mount, have a look its a real issue unless you move the batterysgqmad wrote:I have decided on the disco potatoe as i have used one of these on a GQ and it worked a treat it comes on boost froom almost idle and is full boost around 1600 rpm.. Also has heaps up top as wel. With the pump tricked up i was getting around 165kws at the rears with 35" tyres on the troll with this set up.
I was hoping to try do similar on the 1HZ less the pump mods for now i guess.
I guess all this said and done it sounds like i should be safe to run around 12-13 psi boost with a intercooer as long as i have a pyro and i keep an i on the temp..
I will keep you guys informed but i think i will run the disco potatoe with front mount intercooler and 3" straight through pipes.
Re: turbno
X2 (Very wise advice) may cost more will save you heaps, and less headachethrashlux wrote:the 1HZ is no where near as strong as the nissan motor in the head department dont get too excited it will end in tearsgqmad wrote:I have decided on the disco potatoe as i have used one of these on a GQ and it worked a treat it comes on boost froom almost idle and is full boost around 1600 rpm.. Also has heaps up top as wel. With the pump tricked up i was getting around 165kws at the rears with 35" tyres on the troll with this set up.
I was hoping to try do similar on the 1HZ less the pump mods for now i guess.
I guess all this said and done it sounds like i should be safe to run around 12-13 psi boost with a intercooer as long as i have a pyro and i keep an i on the temp..
I will keep you guys informed but i think i will run the disco potatoe with front mount intercooler and 3" straight through pipes.
the precom chambers swell and contract at a diferent rate to the head cracking them selves then the head
most people dont realise anything is wrong till its too late
even then the engine will run fine make power etc then maybe just start to over heat on hills etc
i think 95% of 1hz turbo's out there if the head was pulled off then they would find cracked precom chambers and if left head cracks as well
best to get a 1hdt no precom chambers and direct injection stronger pistons ,conrods bla bla
play with that it will love it
Re: Boost for 1HZ
Not quite. DPChip is owned by them. It was the original Tunit chips that had the big fight with them, leading to the birth of DPChip:howesy wrote: DP Chip also put out a statement at one stage distancing themselves from that person. Dont know if they still do.
s
http://web.archive.org/web/200707041519 ... pology.php
Last edited by AustImages on Tue Oct 27, 2009 8:56 am, edited 1 time in total.
Jamie Benaud
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
Re: turbno
X3paulm958 wrote:X2 (Very wise advice) may cost more will save you heaps, and less headachethrashlux wrote:the 1HZ is no where near as strong as the nissan motor in the head department dont get too excited it will end in tearsgqmad wrote:I have decided on the disco potatoe as i have used one of these on a GQ and it worked a treat it comes on boost froom almost idle and is full boost around 1600 rpm.. Also has heaps up top as wel. With the pump tricked up i was getting around 165kws at the rears with 35" tyres on the troll with this set up.
I was hoping to try do similar on the 1HZ less the pump mods for now i guess.
I guess all this said and done it sounds like i should be safe to run around 12-13 psi boost with a intercooer as long as i have a pyro and i keep an i on the temp..
I will keep you guys informed but i think i will run the disco potatoe with front mount intercooler and 3" straight through pipes.
the precom chambers swell and contract at a diferent rate to the head cracking them selves then the head
most people dont realise anything is wrong till its too late
even then the engine will run fine make power etc then maybe just start to over heat on hills etc
i think 95% of 1hz turbo's out there if the head was pulled off then they would find cracked precom chambers and if left head cracks as well
best to get a 1hdt no precom chambers and direct injection stronger pistons ,conrods bla bla
play with that it will love it
Jamie Benaud
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
One more thing I should note. During the rebuild of my 1Hz, the mechanic found that Toyota changed the design of the 1Hz pistons around 1999. The new 100-series pistons were lighter and thinner than the 80-series pistons and he suspected that this was one cause of the problems, as he'd seen earlier 1Hzs cope with high boost.
Mine lasted about 90,000km at 14lb. Might sound like a lot, but a 1Hz should do 400,000 no probs.
Mine lasted about 90,000km at 14lb. Might sound like a lot, but a 1Hz should do 400,000 no probs.
Jamie Benaud
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
Australian Images
>LandCruiser 200 Build article and video series
>DIY Camper - Home made camper trailer
>1VD-FTV powered LandCruiser 100
>Vehicle stickers/graphics
Roller turbo is a waste - it spools faster - but your engine wont...
EGT is the key measure. I watch mine.
Most 1HZ's seem to run 10PSI for a reasonable life. Mine is 250,000km.
Intercooling is a safety net - I'm adding it to mine currently.
Opinions vary. It seems all 1HZ's crack heads, but the rate varies. The cooler you can keep them - the longer they will last. Fueling matters more to heat than boost. Again - EGT is the measure.
Paul
EGT is the key measure. I watch mine.
Most 1HZ's seem to run 10PSI for a reasonable life. Mine is 250,000km.
Intercooling is a safety net - I'm adding it to mine currently.
Opinions vary. It seems all 1HZ's crack heads, but the rate varies. The cooler you can keep them - the longer they will last. Fueling matters more to heat than boost. Again - EGT is the measure.
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Re: boost
we are saying 1hz is frail, treat it nice if you have to turbo itgqmad wrote:so you guys are saying not to worry about the intyercooller just ger roller turbo and 10 psi of boost and its all good???
and cannot afford the 1hdt
so treating it nice means low temps as possible (egt)
so low boost less than 10psi
low fuelling as possible
low inlet temps = intercooler YES
good cooling system
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
2psi at idleduck wrote: zoltan i know you run a GT2876 just wondering how much boost you make and when dose it come on boost?
full boost 20psi at 2500
When i was playing with boost levels i maxed out a 30psi gauge at 2800
When i mapped this turbo setup, the turbo/engine configuration would become inefficient at just over 50psi...
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
???? 2 Psi at idle ????Z()LTAN wrote:
2psi at idle
full boost 20psi at 2500
When i was playing with boost levels i maxed out a 30psi gauge at 2800
When i mapped this turbo setup, the turbo/engine configuration would become inefficient at just over 50psi...
What A/R exhaust housing are you using?
Where are you measuring boost pressure and what with?
What do you refer to as "idle"?
I dont understand how this is possible........that is awesome if you are getting 2 Psi out of a GT2876 at idle on a 1HZ!!!
you need the fuel to make the boost......Z()LTAN wrote:Boost does not kill a diesel engine... EGT's kill a diesel engine.
I run 15-20psi on my stock 07 1hz motor, 3" exhaust, good engine cooling system, minimal fuel increase (for now), no intercooler (for now).
I get 120kw and 450NM on 37' tyres.
how do you mean minimal fuel increase, did you do it yourself?
hands and mums dont count!!!
stuff
put axt kit on at 285000km, sold it at 340000km going strong set to 12 psi. 15psi is getting up there. set it to 12 to be safe. Dump, exhaust, slight fuel increase with 28500km old pump and injectors on BFG 33's would tear a new arsehole in my 2006 4.2tdi coilcab with tune, boost 15psi, fuel, timing, zd30 lid, intercooler fan, BD dump, 3 inch on 265's. The old 80 did a fair bit of towing too- 2tonne+. Wouldnt dream of towing hd car trailer with wagon on back overtaking cars in the right lane flying down the gateway at 110 in 5th with the gu. 6" lift too, 13LT/100KM FUEL. it was a freak and i damn i miss it. biggest thing BOOST GAUGE AND PYRO FULLSTOP. 1HDT's and 1HD-FT go even better though
Who is online
Users browsing this forum: No registered users and 19 guests