Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 & 100 series rear diff centre
Moderators: toaddog, Elmo, DUDELUX
80 & 100 series rear diff centre
I have tried searching but didn't find the info I was looking for.
I have a rear air locker in my 3FE powered 80 series, and the standard 4.1 ratio and have just bought a HZJ105R.
The air lockers are a different part number for each so obviously I can't change the locker between diffs.
Can I swap the 2 diff centres as a whole, using the 80 series centre in the 100 with the 100 series axles and vice versa.
Thanks in advance.
I have a rear air locker in my 3FE powered 80 series, and the standard 4.1 ratio and have just bought a HZJ105R.
The air lockers are a different part number for each so obviously I can't change the locker between diffs.
Can I swap the 2 diff centres as a whole, using the 80 series centre in the 100 with the 100 series axles and vice versa.
Thanks in advance.
You could do kind of what I've done, I've just fitted a 100 series front and rear arb's to my 80 running 4.3's all I had to do was fit 80 series star gears to the 100 locker.. you could go the otuer way around.. It would have been good to do the 100 hubs and axles but then I would have had to make some new hubs to fit the 80's 6 stud wheels and so on..
Who is online
Users browsing this forum: No registered users and 3 guests