Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux gearbox upgrade

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 116
Joined: Wed Sep 20, 2006 8:03 pm
Location: Rockhampton QLD

Hilux gearbox upgrade

Post by ELF_83 »

got a 95 hilux 2.8 with a commodore v6 in it and first drive out think its bent the input shaft to the box. Just wondering if there is any aftermarket cromo shafts etc availiable or an alternative that will still bolt up to the hilux 5 speed bell housing from the conversion. Thanks for any help haven't been able to find much in searches and on google.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

What makes you think you bent the input in the gearbox??
plenty of parts on the bench
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

Sic Lux wrote:What makes you think you bent the input in the gearbox??
x2
have you pulled the box out yet?
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Posts: 100
Joined: Tue Aug 18, 2009 7:02 pm
Location: south coast

Post by optima »

get a r151 r15f out of a v6 4runner the box is twice as stong as the g52 but you will need a new bellhousing from www.dellowauto.com.au about $550 plus gst hope it helps
if its got t#ts or tyres your gunna have trouble with it
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 72 guests