Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU anchor points

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 46
Joined: Sat May 23, 2009 12:58 pm
Location: kingswood nsw

GU anchor points

Post by unr33l »

Was looking to fit a 3rd child seat to my wagon and realised there is nowhere to mount the anchor point in the middle. ( 2nd row). Have had a chat to child restraint station who explained seat is not engineered to take a restraint in the centre and also is where the 2 seats meet ( 50/50 split) so restraint would fall between the seats. There is no option to mount to the roof either, so only option is a 'crab bar' where all three restraints can be fitted. However the rear seats would have to be removed as they would be a hazard to anyone in the 3rd row seats.
Has anybody heard of any other way to fit a 3rd anchor point, without losing the 3rd row seats?
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

The 2 outside anchor points are immediately behind the 2nd seat. But I thought there was a third, towards the rear of the cargo area, just in front of the barn doors. I would have to have a look and check.
Mud makes excellent toothpaste.
Top
Posts: 46
Joined: Sat May 23, 2009 12:58 pm
Location: kingswood nsw

Post by unr33l »

your correct, the third is on the passenger side near rear door. I want to fit 3 across the 2nd row of seats though.
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

fit the crab bar and remove the rear seats,

rear seats are only for families anyways
Top
Posts: 46
Joined: Sat May 23, 2009 12:58 pm
Location: kingswood nsw

Post by unr33l »

i've got a family and its getting bigger. well will be bigger by monday,hopefully.
Top
Posts: 46
Joined: Sat May 23, 2009 12:58 pm
Location: kingswood nsw

Post by unr33l »

so shaun i'll just send the extra kiddies over to you on the next trip eh..
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

ill pass thanks mate, you planning it all wrong if you want to take extras,

my trucks baby free for now, i reakon just go the crab bar and you will be sweet, you could pad it with roll cage foam, to protect any one in the rear, just make acess a little bit harder
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Here in Qld you can get one fitted and blue plated. Should be the same down your way.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 46
Joined: Sat May 23, 2009 12:58 pm
Location: kingswood nsw

Post by unr33l »

the crab bar mounts under side windows - if you look there is a square removeable panel. it is behind where the seats fold up, not gonna leave them down permantly and probley get knocked back on rego even with foam. gonna find out more on roof mount.
Top
Posts: 46
Joined: Sat May 23, 2009 12:58 pm
Location: kingswood nsw

Post by unr33l »

talked to another fitting station today. can fit 3 points to roof crossmember at rear near barn doors. the left and right have a hole already, but the middle one has to have a hole drilled and a plate inserted with a bolt welded to it and pop riveted in. a small hole in the trim also has to be cut to mount the anchor point. was quoted $100 to get done and signed off. very handy also for anyone with drawer systems..
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest