Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff interchangability

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Diff interchangability

Post by vk7ybi »

Will a 80 series high pinion centre fit in a 82 model Hilux front housing?
Top
Posts: 198
Joined: Tue Jul 29, 2008 1:15 pm
Location: Wide Bay

Post by Barno111 »

i am lead to believe that they are interchangeable. I also believe that the hilux's have the same diff front and rear! But you will have to get a couple more to confirm that!
1996 HZJ75RP, DTS turbo with 3inch exhaust, rear locker, MTZs, 2inch shackles, 2 inch custom packs!
Top
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

heres some links to threads where it has been covered before

http://www.outerlimits4x4.com/viewtopic ... suspension

http://www.outerlimits4x4.com/viewtopic.php?t=55319
Top
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

yes, solid axle hilux diff centres are interchangeable.
yes, a high pinion hi-lux diff centre will go into an 80 series front diff.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Thanks, I just wasnt certain that the early hilux was the same stud pattern and size as the later ones..

Reason I ask is that I have a 82 hilux housing, theres a 4.88 high pinion bundera centre available, and I thought I could do something creative with these parts in SOA configuration in one of my 40s.. The housing measures the same width as a 40 front housing, so it would make a good swap for high pinion SOA..
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests