Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33x12.15x15 on 4Runner?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 167
Joined: Sun May 22, 2005 5:59 am

33x12.15x15 on 4Runner?

Post by harvey »

Hi All,

just wondered if anyone has run the above size tyre on their 4Runner/Surf? If so, does it stick out beyond the fiberglass arches? - as this is something I want to avoid.

Thank you!
Harv.
Posts: 100
Joined: Tue Aug 18, 2009 7:02 pm
Location: south coast

Post by optima »

my mates 4runner runs 33x12.5 on 15x10 rims an they stick out past the flares about an inch . but thats on tens might be diffrent on 8s
if its got t#ts or tyres your gunna have trouble with it
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Post by -Nemesis- »

Yep they do.

I just used some black bunnings garden edging plastic, easy to fit, hardly noticable, engineerable (tyres.)

Image
Lovin the FZJ105-T, bling by Ryano
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

They stick out but only just, these are on a -28 offset
Image

Not as much as they stick out on a navara though :D
Image

The tires on my runner probably stick out about 10mm past the flares, which isn't too bad, but they do throw mud and crap all over the side of the car, so bunnings flares are advised.

Cheers
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

Thanks folks.

Thinking about it further, I'll either end up with 32x11.50x15 or graduate to 16" and put 285's on.... that way they won't stick out but still be larger than 31's which is what i'm after.
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

33x12.5s on 15x10's with -50mm offset. Hanged a fair bit out.
Image

Best pic I've got of 33x12.5s on 15x8's with Cruiser offset (-30mm). Only just outside the flares.
Image
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

Im thinking about putting my 33's on my dual cab trayback gen3 work lux. the manual 3RZ gearing sucks. Revs at 3k at 100kph... :roll:

15x8's with i think -11 offset.
Is this a bad idea with no lift? IE would it rub to the shthouse?
Its pretty much only road driven. (sorry for highjack).
All the gear, No idea...
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

Dee, they may rub on the sway bar, but should clear the rest ok.

I had the problem of rubbing the sway bar when running the 35s on 17x9s and -12mm offset.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

reading this... and thinking that the std Toyota wheels are 15x7JJ with a -8 offset, it should actually be possible to have the 33's without them sticking out then? If I understand correctly the greater the 'minus' figure is for the offset, the more the wheels stick out??
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

another yes haha. mine do by about an inch or so. flexy flares fix the problem though.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Post Reply

Who is online

Users browsing this forum: No registered users and 98 guests