Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Best material for Tray and best prices

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Best material for Tray and best prices

Post by collins110 »

just planning and wanting to know if i should us 4mm thick RHS and where to get it in vic for a good price..
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

3mm is thick enough, you also don't need many cross bars and they can be smaller material.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Best material for Tray and best prices

Post by bogged »

collins110 wrote:just planning and wanting to know if i should us 4mm thick RHS and where to get it in vic for a good price..
fix your diff first.. :lol:
Top
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Re: Best material for Tray and best prices

Post by collins110 »

bogged wrote:
collins110 wrote:just planning and wanting to know if i should us 4mm thick RHS and where to get it in vic for a good price..
fix your diff first.. :lol:
lol...the tray will be made after schoolies and well i need to drive there so the diff will need fixing first ...ill see if my dad can get some bearings organized on Wednesday
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Best material for Tray and best prices

Post by bogged »

collins110 wrote:
bogged wrote:
collins110 wrote:just planning and wanting to know if i should us 4mm thick RHS and where to get it in vic for a good price..
fix your diff first.. :lol:
lol...the tray will be made after schoolies and well i need to drive there so the diff will need fixing first ...ill see if my dad can get some bearings organized on Wednesday
Ask in the toyota section for bearing #'s then head to CBC bearings.
Top
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

there is a good place in campbell field on barry road, turning right from sydney road when heading toward sydney, go past the first street (the paint ball shop/semoz) is on the corner of that, and the steel place is not to far from that, on the left hand side, i dont remenber the name, but they were quite cheep.
Go Hard Or GO Home
Top
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Post by collins110 »

its called Surdex Steel‎
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

well there you go, that is where i will pick up steel i need from now on
Go Hard Or GO Home
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests