Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bundera. Spring lift Question!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 10
Joined: Fri Oct 30, 2009 11:46 am
Location: Brisbane

Bundera. Spring lift Question!

Post by HemRz »

Hello all i have a Toyota Bundera.

i have been looking at putting a 2 inch body lift on it as i already have a 2 inch spring on.

i have recently been told that a 80 series Spring kit will fit under my bundera and the 2 inch 80 series gives the bundera a 4 inch lift.

i was just wondering has anyone done this before? and is there much work involved in putting the 80 series 2 inch on a bundera? and what else will i have to do etc to the car to get it all working good?

Regards HemRz!
Posts: 52
Joined: Fri May 18, 2007 7:54 pm
Location: Melbourne

Post by Sentinel »

Hey mate, here is another thread from a little while back about putting springs in a bundera.
I think from memory you use 80 series front springs, rear are too big. Standard 80 springs will give you about 3" of lift.

Have a read mate...
http://www.outerlimits4x4.com/ftopic176 ... highlight=
Posts: 10
Joined: Fri Oct 30, 2009 11:46 am
Location: Brisbane

Post by HemRz »

Sentinel wrote:Hey mate, here is another thread from a little while back about putting springs in a bundera.
I think from memory you use 80 series front springs, rear are too big. Standard 80 springs will give you about 3" of lift.

Have a read mate...
http://www.outerlimits4x4.com/ftopic176 ... highlight=
Awesome stuff Normal 80 Fronts for the front and heavy duty 80's fronts for the Rear.

it dosnt mention anything about the shocks does anyone have the answer for this?

would be much appreciated and ty! again Sentinel
Posts: 10
Joined: Fri Oct 30, 2009 11:46 am
Location: Brisbane

Post by HemRz »

Bump.

Would i use the Shocks from the 80 series or os there a diffrence aswell?
Posts: 171
Joined: Sun Aug 12, 2007 7:33 pm
Location: frankston

Post by pozman »

im running ome 80 shocks with mine, seams to go alright, pretty cheep lift, and the flex aint to bad, for a bundy

i think one of the rear ones is either too long or too short as the rear set up is a bit weird

one of the rears will need the eye from the old shock welded on instead of the pin the 80 has, i welded mine on myself and haven't had an issue yet after quiet a few kays

with that much lift it tends to steer a bit shit cos of the caster issues, but you can run 80 correction bushes, they will need to be pushed into the bundys outer ring of the bush as the 80 ones are smaller, seems a bit booty fab but pedders did it for me and they were happy with it
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests