hilux chassis ?'s

Website · Post by **killalux** » Wed Feb 25, 2004 7:59 pm

just want to know if the body mounts on a gen2 single cab chassis are the same as a gen3.
cheers
steve

Website · Post by **killalux** » Wed Feb 25, 2004 8:39 pm

another question, how hard would it be to mount a gen3 single cab to a gen2 runner chassis, or possibly even a gen3 extra cab body.

Post by **Brettocustom** » Thu Feb 26, 2004 12:03 am

Found this, apparently this guy has 1993 body on a 1986 chassis. so it says

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... gory=18290

Post by **4sum4** » Thu Feb 26, 2004 5:41 am

This pic might help in dimensions

Website · Post by **killalux** » Thu Feb 26, 2004 9:30 pm

Brettocustom wrote:Found this, apparently this guy has 1993 body on a 1986 chassis. so it says

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... gory=18290

thats the sort of thing i was lookin to build, but not quite so tall or so pretty

Post by **TWISTY** » Fri Feb 27, 2004 10:18 am

killalux wrote:another question, how hard would it be to mount a gen3 single cab to a gen2 runner chassis, or possibly even a gen3 extra cab body.

I don't think it's too hard, a couple of custom body mounts and that's it. I see your from the Sunny Coast, theres a guy in Caloundra that has two of them (a Blue One and a Silver), it's some Mazda Shop or something in Daniel Street. They look really cool. I think you use the single cab body and an extra cab style side for a perfect fit.

The ARE guy also has one, there is some details on his site, but it's mainly about intercoolers.

http://www.are.com.au/feat/hilux/hilux.htm

Website · Post by **killalux** » Fri Feb 27, 2004 9:09 pm

this is more wat i had in mind, but the it might be a bit to much dollars for the new shell

Outer Limits 4x4 Board

hilux chassis ?'s

hilux chassis ?'s

Who is online