Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gu 4.5 more power wanted any suggestions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

gu 4.5 more power wanted any suggestions

Post by icrawl »

how do i get more power out of this peice of shit without bolting a turbo to it. i dont want to spend heaps as i will either turbo or v8 it latter down the track still trying to make up mind . its a 5spd on gas and fuel also only running 265 tyres but will be going to 285 or 305 when these wear down
whatever suggestion u have can u give me an indication of roughly how much more it will have
i need more power
exhaust, extractors , computer ect ect
thanks
Posts: 50
Joined: Sat Sep 01, 2007 11:14 am
Location: gladstone

Post by ratbagpatrol »

hay mate i have a tb45e only on pettey in my comp truck non turbo the best thing i did was put after market injection on mine i whent for a micro tec systerm about 1200 to do the job i did all the wireing my self i a set of pipes on it and put a cam in it the cam is not to crazy from standard only about one or two thou on the lobes did not want to loose that luggly big block feal i also played with the timing and go it more respoive it is good now injectors have been replaced with bigger units and up the fuel pressure with and adjustable unit about $100 on e bay althougt i am gearing up for turbo mine goes good
Nissan patrol swb style side ute comp truck 3.5"costom lift, 2"body lift, 35" maxxis creepy, microtec injection, 24v moded hi mount with all the goodies, thanks Dowie from Lister Motors
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

Post by icrawl »

what cam did u use ,do u have the grind of the cam, also where did u get injection system from and what size injectors have u used and where did u get them from cheers
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

In regards to the ECU have you looked to see if you can get a Nistune board for it?
GQII Patrol YAY!!
Post Reply

Who is online

Users browsing this forum: No registered users and 70 guests