Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone have pics of GQ ARB bullbar mounting brackets??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Anyone have pics of GQ ARB bullbar mounting brackets??

Post by lewie »

Anyone have pics of GQ ARB bullbar mounting brackets??

please thankyou.
beer gimme gimme ! ! !
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Could get one for you soon as i'm about to pull mine off and make a tube bar.

Basically it's approximately 125x80x5or6mm channel which wraps around chassis rail. There's then a plate inside chassis rail with threads to match chassis rail mounting holes.

Something like that anyway ;)
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Post by lewie »

yeah just have to make up the inside section with the nuts welded on. fella from arb is probly going to fax me some info too.
beer gimme gimme ! ! !
Top
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

lewie wrote:yeah just have to make up the inside section with the nuts welded on. fella from arb is probly going to fax me some info too.
I think I have an spare set floating about somewhere, and i'll be in Brisbane next week aswell. PM me if interested.
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

sorry for hijak, but is this the same way most winch bars are fitted? I'm making up a tube bar and want a strong mount to chassis, was gunna do the similar as arb. Any better ideas out there?

cheers
Bear
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

ok lewie,

passenger's side has a u-bracket that fits snugly inside chassis rail and has nuts welded to it to pick up 2 side bolts and 1 underside bolt. Also has 1 bolt under body mount as a locator.

driver's side uses an angle bracket which just picks up underside bolt and locator bolt under body mount. The other 2 side bolts fix to a OE bracket inside chassis rail.

Then as mentioned bullbar has a channel which slips over chassis rail. Locator bolts are also placed to pick up tie down points under body mounts.

Hope this helps
Bear
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Post by lewie »

yeah i got sent some stuff from arb but only shows front angle with the U bracket on one side and the L bracket on other. might try and make something up see how motivated i get hmm.

thanks guys :cool:
beer gimme gimme ! ! !
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 133 guests