Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Trying to sort out ignition wiring

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 28
Joined: Tue Apr 26, 2005 5:14 pm
Location: Brisbane

Trying to sort out ignition wiring

Post by Tim356 »

I recently replaced my 1L donk with a 1.3L and replaced dash and complete wiring loom also. I just finished plugging the wiring loom in and am having some troubles starting her up.

I'm getting power to the starter and all electrics (lights, wipers, indicators, clock etc) are working fine, but I'm not getting any spark. Can someone give me a few tips as to how the coil and dizzy are wired up? What sort of voltage should I be seeing at the positive terminal on the coil? I'm only seeing 0.5V.

Also, how should the dizzy be wired - I've got a black wire coming out of it going to the negative on the coil and a yellow wire coming out of it going to the positive on the coil - is this right? Then a wire coming from the wiring loom to the positive on the coil.

Any help would be great, it's driving me crazy.
Top
Posts: 28
Joined: Tue Apr 26, 2005 5:14 pm
Location: Brisbane

Post by Tim356 »

I managed to get it started today by disconnecting the loom from the positive terminal on the coil and running a wire direct from positive on the battery. The loom seems to be earthing that connection somewhere and bringing volts down to 0.5v.

Any idea where this might be happening?
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests