Hey guys, this is my FIRST EVER OL4x4 POST, so here goes!
I have been reading your threads for a few weeks now and it seems that you guys have your 4x4 tech pretty much wrapped up. Loads of guys here are starting to import Aussie stuff for Landys.
There has been mention of people using CVs in thier propshafts instead of UJs, which seems to me to be a good idea. I have just fitted homebrew custom cranked front and rear radius arms to the Landy, and there is quite a bit of rumble from the UJs now. This is stock on-the-road, so offroad I guess there would be more chance of something blowing.
Having had a front UJ break up at about 50mph and the propshaft try and hammer it's way into the footwell, it's not an experience I'd want to relive!
Is there an easy way of using a CV in pace of one UJ in the shaft? Or would you be able to swap them both? Would this be as strong as a UJ? And which CV should I use?
Thanks for your help in this guys!
Simon
1984 90" Station Wagon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Propshaft CVs
Moderator: Micka
Feeling nice this morning - all coffee'd up and its Friday so I will be very helpful...
A lot of what you want to know has already been discussed sir. Various experts have given there considered opinions and we have all had the chance to debate their respective merits. For respected and esteemed newbies like yourself the great and holy moderators [there is no bum licking smiley
] have kindly installed a search function which effectively encyclopediasises [like that 
] the combined wisdom of all and sundry...
I direct your attention to the top of the page:
And in keeping with this mornings generousness I have used it myself to find you this marvelous thread:
http://www.outerlimits4x4.com/PHP_Modul ... ble+cardan
What you are looking for is not a CV in the bell/cage/bearing sense of the term but instead two UJ's back to back - also called a CV and sometimes a double cardan...
Welcome and thank you for your enquiry
A lot of what you want to know has already been discussed sir. Various experts have given there considered opinions and we have all had the chance to debate their respective merits. For respected and esteemed newbies like yourself the great and holy moderators [there is no bum licking smiley
] have kindly installed a search function which effectively encyclopediasises [like that ] the combined wisdom of all and sundry...
I direct your attention to the top of the page:
And in keeping with this mornings generousness I have used it myself to find you this marvelous thread:
http://www.outerlimits4x4.com/PHP_Modul ... ble+cardan
What you are looking for is not a CV in the bell/cage/bearing sense of the term but instead two UJ's back to back - also called a CV and sometimes a double cardan...
Welcome and thank you for your enquiry
The Lucas motto: "Get home before dark."
Beautiful bodge.
But Im in a good mood to.
Before changing to a double cardan type joint.
Std uni set up 1 uni each end prop shaft T/case out put and diff input need to be in the same plain.
d/Cardan set the diff pinion is to point at the t/case output.
regards
Michael.
But Im in a good mood to.
Before changing to a double cardan type joint.
Std uni set up 1 uni each end prop shaft T/case out put and diff input need to be in the same plain.
d/Cardan set the diff pinion is to point at the t/case output.
regards
Michael.
Last edited by HSV Rangie on Fri Feb 27, 2004 7:08 am, edited 4 times in total.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Bodge wrote:Feeling nice this morning - all coffee'd up and its Friday so I will be very helpful...
A lot of what you want to know has already been discussed sir. Various experts have given there considered opinions and we have all had the chance to debate their respective merits. For respected and esteemed newbies like yourself the great and holy moderators [there is no bum licking smiley
I direct your attention to the top of the page:
And in keeping with this mornings generousness I have used it myself to find you this marvelous thread:
http://www.outerlimits4x4.com/PHP_Modul ... ble+cardan
What you are looking for is not a CV in the bell/cage/bearing sense of the term but instead two UJ's back to back - also called a CV and sometimes a double cardan...
Welcome and thank you for your enquiry
Now that is some FUNNAY SHIAT
Who is online
Users browsing this forum: No registered users and 0 guests