Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G16B 16 valve MPFI engine Won't produce power

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

G16B 16 valve MPFI engine Won't produce power

Post by HRZOOK »

Hi guys

I have a G16B 16 valve MPFI engine in my Sierra

Has been running sweet for years.

I recently went for a wheel when suddenly the engine wouldn't produce power under load. I manged to limp the car home but since then I haven't been unable to fix the issue. I have had some talented people ;) help me too but still cant put our finger on it.

The engine code is still spitting out 12 which means normal start.

I have put in new plugs, the leads are only 2 years old and look in good condition.

It won't start with the MAS plugged in and the car will idle without it but still produce no power under load. If I put the MAS on after starting it seems to run worse than without it. I have checked for air leaks and don't believe there is any. I have changed the MAS with one from the wreckers, no change. All other sensors seem not to be lose.

Help me Obi-Wan Kenobi your my only hope :D

Thanks In Advance
HR

EDIT: I checked the fuel pump output by eye (no gauge) and it seems to be a steady flow with good pressure.
Last edited by HRZOOK on Fri Nov 06, 2009 7:06 pm, edited 1 time in total.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Been in any water anywhere?

Have u by any chance swapped the MAS and or ecu with a known good working one?

as wouldnt be the first dodgy wrecker part ive heard of.

I am pressuming it is getting spark ok at idle as its idling ok but maybe loosing spark under load.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 144
Joined: Wed Feb 25, 2004 7:55 pm
Location: Auckland, NZ

Post by BenT »

Have you checked the ignition timing? Maybe jumped a tooth on the cam belt, or flogged out the crank pulley key?

Ben
WWW.ZUKPARTS.COM - Quality Suzuki Off-road Parts - 1600 Adaptor kits - Vitara Power Steering adaptor kits - Disc brake kits - Heavy Duty Transfer case arms & more
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

i agree with ben, check the bottom pulley first. also check the pcv valve. this is the little emissions thing that feeds some air back into the intake, and it may be playing up. if you are getting a code 12 than i would look for mechanical, rather than efi problems. also make sure the dizzy has no white corrosion covering the hall effect sensor etc.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

BenT wrote:Have you checked the ignition timing? Maybe jumped a tooth on the cam belt, or flogged out the crank pulley key?

Ben
X2 on this one, look for any red dust around the bottom of the timing cover or the harmonic ballancer, this indicate's that something has come loose
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Do you have to remove the battery to reset limp mode and to reset codes from the ECU?
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

HRZOOK wrote:Do you have to remove the battery to reset limp mode and to reset codes from the ECU?
yes, or just pull the main fuse for a few seconds. if you are only getting a code 12 than the ecu will not be in limp mode.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

No water nicbeer I steer clear of mud and water.

Yeah I was thinking I could have another dodgy MAS

If ya live in Newy and have the old skool MAS (pod/Cone style) on ya zook bring it round to test and I will fix ya up with some beers....Serious :cool:
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

compression test
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

I pulled off the TPS and still got code 12 from ECU so I guess we can discount the fact that it is giving code 12.

It idles OK without MAS but after connecting runs worse and if the accelerator is jabbed quickly it tries to stall.

I guess it wouldn't be a mechanical issue if it idles OK without MAS?
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

BenT wrote: Maybe jumped a tooth on the cam belt,
Ben
I have seen em do this I had a 1.3 in a sierra towed in to work sounded like no compression but cam was turning pulled the front cover of to find the belt had jumped teeth about 7 or 8 camt really remember, but if it only jumped 1 or 2 could do what your saying I would check there first

hope this helps ;)
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

jimbo jones wrote:
BenT wrote: Maybe jumped a tooth on the cam belt,
Ben
I have seen em do this I had a 1.3 in a sierra towed in to work sounded like no compression but cam was turning pulled the front cover of to find the belt had jumped teeth about 7 or 8 camt really remember, but if it only jumped 1 or 2 could do what your saying I would check there first

hope this helps ;)
Would this show the timing being out if I used a timing light?
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

HRZOOK wrote:
jimbo jones wrote:
BenT wrote: Maybe jumped a tooth on the cam belt,
Ben
I have seen em do this I had a 1.3 in a sierra towed in to work sounded like no compression but cam was turning pulled the front cover of to find the belt had jumped teeth about 7 or 8 camt really remember, but if it only jumped 1 or 2 could do what your saying I would check there first

hope this helps ;)
Would this show the timing being out if I used a timing light?
yes, but for an accurate reading you must have the diagnosis plug shorted out, as if you were checking codes.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

joeblow wrote:yes, but for an accurate reading you must have the diagnosis plug shorted out, as if you were checking codes.
On a side note any reason why I am only getting code 12 from ECU. I am guessing if it is blinking I haven't shorted it out incorrectly?
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Sounds like a cracked inlet manifold. :?
[url]www.twinstickoffroad.com[/url]
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Spray round the inlet manifold with some carby cleaner. See if the idle picks up. I was going to do the front mount in the subaru this weekend, but it looks like i will have to put that off. Let me know if you want a hand.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 247
Joined: Mon Mar 10, 2008 9:49 pm
Location: maryborough

Post by me217 »

also check your fuel pressure regulator. mine went really gutless wen i put a different fuel reg on. but it could have died.
me217

1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
Top
Posts: 49
Joined: Tue Jul 08, 2008 1:14 pm
Location: Jindabyne

Post by crazynic »

To check for a mechanical fault such as the timing belt jumping a tooth simply use a vacuum gauge and make sure it has full manifold vacuum where you "T" it in........

It should be around 21 inhg at idle and if it is much lower then say 18 then you either have a big vacuum leak (easy to diagnose) or a valve timing of similar issue.
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

me217 wrote:also check your fuel pressure regulator. mine went really gutless wen i put a different fuel reg on. but it could have died.
Where is this located?
Thanks
HR
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

HRZOOK wrote:
me217 wrote:also check your fuel pressure regulator. mine went really gutless wen i put a different fuel reg on. but it could have died.
Where is this located?
Thanks
HR
I checked this quickly the other day. Its the correct reg and it has no leaks.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

lay80n wrote:
HRZOOK wrote:
me217 wrote:also check your fuel pressure regulator. mine went really gutless wen i put a different fuel reg on. but it could have died.
Where is this located?
Thanks
HR
I checked this quickly the other day. Its the correct reg and it has no leaks.

Layto....
You da man Homer
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

OK after much dicking around and changing many a part I should have stuck to my original thought....the fuel pump

Pressure tested the pump and it was producing a massive 10 PSI.

I guess I am pulling the tank out tomorrow :?
Top
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

Post by islandvitara »

Whats the fuel pressure supposed to be?
just beat a Marlin in a swimming race
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

HRZOOK wrote:OK after much dicking around and changing many a part I should have stuck to my original thought....the fuel pump

Pressure tested the pump and it was producing a massive 10 PSI.

I guess I am pulling the tank out tomorrow :?
when i'm doing my " by the eye ball " fuel delivery check, i take the return line off so if it has a steady flow you know it has at least reg pressure behind it.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

islandvitara wrote:Whats the fuel pressure supposed to be?
I think about 35 PSI but someone else might clarify
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

^^^Sounds about right.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 82
Joined: Sat Oct 13, 2007 8:20 pm
Location: brizzy

Post by sic_zook »

maybe fuel fiter is blocked
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Nah, it has a new fuel filter on it ;)

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Also I tested before the filter and after the filter
Top
Posts: 1
Joined: Tue Dec 22, 2009 5:33 pm
Location: cessnock nsw

Post by 92zookwill »

you really need to look at fuel pressure. and air fuel mix in the exhaust. low fuel pressure will produce exactly this.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests