I just bought myself a 1978 Dyna (no its not a type its 1978). it has the 5R 2.0litre petrol motor and a 5 spd gearbox running a PTO tipper.
I want to swap the motor over as its painfully slow when its loaded but need to keep the gearbox and PTO for the tipper. Whats the easiest/cheapest "best bang for buck" engine swap. I dont want a race truck I just want to be able to sit on 100km/hr.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Toyota Dyna Questions
Moderators: toaddog, Elmo, DUDELUX
Just put a holden v6 in a dyna motor home..Purchased bell housing from castlemaine rod shop ..Bolted straight to the original 5 speed..All good exept diff ratios currently running 5.8 diff...Vehicle goes like the clappers but uses more juice than a 747..@ 100k doing about 4 thousand rev.... Need a 4.1 to 4.3 ratio Some advice would be muchly appreciated cheers
What year model dyna? what motor did it have originally?denzar wrote:Just put a holden v6 in a dyna motor home..Purchased bell housing from castlemaine rod shop ..Bolted straight to the original 5 speed..All good exept diff ratios currently running 5.8 diff...Vehicle goes like the clappers but uses more juice than a 747..@ 100k doing about 4 thousand rev.... Need a 4.1 to 4.3 ratio Some advice would be muchly appreciated cheers
A 13bt (3ltr TD from a dyna or coaster)would be the pick u need to see if u can find a suitable bellhousing and also maybe put some different ratio diffs in
would use very little fuel and be well suited as it is a simple engine and a truck engine
otherwise a 3rz if you want to keep it petrol and cheap
a holden straight six is the worst idea u would need to have a 44 in the tipper to keep the fuel up to it
would use very little fuel and be well suited as it is a simple engine and a truck engine
otherwise a 3rz if you want to keep it petrol and cheap
a holden straight six is the worst idea u would need to have a 44 in the tipper to keep the fuel up to it
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
This is the best advise ive seen so far id look about for a 13b or 13btthrashlux wrote:A 13bt (3ltr TD from a dyna or coaster)would be the pick u need to see if u can find a suitable bellhousing and also maybe put some different ratio diffs in
would use very little fuel and be well suited as it is a simple engine and a truck engine
otherwise a 3rz if you want to keep it petrol and cheap
a holden straight six is the worst idea u would need to have a 44 in the tipper to keep the fuel up to it
I have a 13b and dyna 5 speed here in an 85 dyna engin is recoed and has only done 1000k's the box has only got 140K on it it will all be up for sale once i get time to part the old dyna out .
Cheers
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Who is online
Users browsing this forum: No registered users and 54 guests