Gday,
Finally got my engineers cert for my 4 runner for the commodore motor with auto and high steer. I need to get a blue slip as well and i got failed on the blueslip for excessive steering wheel play. Tried to tighten using the adjust ing screw and it wont tighten up much. Admitted i am using the haynes workshop manaul and it is a JOKE! It tells me to loosen lock nut off and then tighten thread in the middle. Please anyone tall me if this is not the correct way to do it.
I am a bit pissed off about it because to get the engineers cert i had to put all the standard springs back in it with dropped hangers and the front springs are an absolute joke ( inverted big time) and the engineer passed it and said nothing about box or springs but the blue slip guy gets me on the steering box. Ahhhhhh.
Can i buy a reco steering box or a kit to do it and have someone do it?
Cheers
Dave
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Steering Wheel Play on 85 4 runner with IFS box & high s
Moderators: toaddog, Elmo, DUDELUX
Steering Wheel Play on 85 4 runner with IFS box & high s
"There is gold in them there hills"
Who is online
Users browsing this forum: No registered users and 99 guests