Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 series checkerplate
Moderators: toaddog, Elmo, DUDELUX
40 series checkerplate
Just wondering if anyone knows of places here in Aus, preferably QLD, that supply the rear quarter panel covers in checkerplate. All the yanks seem to be all over them, but cost a $hitload to send over here. Must be someone over here that does them.
Resident Terrorist
Awesome! I had no idea MAF had an Australian outlet. Not alot on their site yet but they are stll building it by the looks. They have the bushings for early tie rod ends to late model knuckle arms too.woodyjbh wrote:Something like this you mean???
http://manafreaus.cart.net.au/details/2674479.html
Wood
Yeah,
The thing that interested me most was the shackle reversal kit. Combine it with a set of 45 series trayback rear springs (Their really long) and the front of the 40 flexes like crazy.
just gotta figure out what to put on the rear. Thinking the same springs with drop shackles...
I've emailed Dave at Man a Fre several times and they've always been super quick to respond, which is always a good sign in my book.
The 2 other places I've been getting 40 info from lately are Rob from Jeep City and Ken from Eureka off road. Both seem to know a fair bit about whats going on...
Wood
The thing that interested me most was the shackle reversal kit. Combine it with a set of 45 series trayback rear springs (Their really long) and the front of the 40 flexes like crazy.
just gotta figure out what to put on the rear. Thinking the same springs with drop shackles...
I've emailed Dave at Man a Fre several times and they've always been super quick to respond, which is always a good sign in my book.
The 2 other places I've been getting 40 info from lately are Rob from Jeep City and Ken from Eureka off road. Both seem to know a fair bit about whats going on...
Wood
Twisted by Design
Resident Terrorist
none taken.....TWISTY wrote:No offence to anyone with checkerplate on there 40, but I think it looks terrible. Don't know why anyone would want to do it unless its for covering up some rust, but even then, just fix it properly.
I put mine up after scraping the right rear corner in a tight creek bed. There was no rust there, I fixed and painted the body work and decided to put the checkerplate on there to stop it happening in the future. There's been a few times I've nudged stuff that would normally leave a nice gouge in the guard or at minimum scrape the paint off but with the plate on there you'd never know it happened. When I made the drop down tailgate I covered it in checkerplate to match. Can't say I was hoping it would win any beauty contests but I think it does it's job and doesn't look ugly doing it.
probably lots of rust now. Checkerplate is great for promoting and hiding rust growth. Moisture gets trapped between it and the panel and it just rusts your car away. Unless you live in a low humidity environment and never see any moisture or water.RAY185 wrote: I put mine up after scraping the right rear corner in a tight creek bed. There was no rust there, I fixed and painted the body work and decided to put the checkerplate on there to stop it happening in the future.
I sealed around mine and it was sweet, looks good, works great! But I do think its very 1999-2000, having said that Ray is normally quite on top of the fashion trends with his white leather shoes and frosted tips, popped collar and fancy haircuts! I dont know how he commited this fashion crime.
hands and mums dont count!!!
Resident Terrorist
As I said, there was no rust to cover up and fair enough on the looks. If everyone had the same taste, you and BJ would still be virgins.GO79 wrote:I think that it is a slack way to fix rust and looks cheap and nasty
Possibly, however i primed and painted the inside face of the checkerplate and siliconed the edges to stop water ingress. I also have ERPS fitted. At the end of the day, it's a 34 year old cruiser, I'm sure most would agree that a little rust is inevitable.Tojo wrote:probably lots of rust now. Checkerplate is great for promoting and hiding rust growth. Moisture gets trapped between it and the panel and it just rusts your car away. Unless you live in a low humidity environment and never see any moisture or water.RAY185 wrote: I put mine up after scraping the right rear corner in a tight creek bed. There was no rust there, I fixed and painted the body work and decided to put the checkerplate on there to stop it happening in the future.
Hey, next you're gonna say my baggy Cross Colours, gold chain and Swatch watch are not cool anymore. Don't even think about telling me I have to wear my cap the right way around!bj on roids wrote:I sealed around mine and it was sweet, looks good, works great! But I do think its very 1999-2000, having said that Ray is normally quite on top of the fashion trends with his white leather shoes and frosted tips, popped collar and fancy haircuts! I dont know how he commited this fashion crime.
Like I said before, I don't think it looks terrible and at the same time I don't expect it to win any beauty contests. It serves a purpose and is also good at keeping tailgaters at bay. They tend not to follow too close at night as their headlights reflect back in their eyes.
Ah thanks for that guys.
Gee they dont miss you on the price, might just have a crack at doing it myself. What does everyone think the neatest way to bend it would be?
Im not hiding the rust on my truck, none in that area, just like the look of it. Thanks for the feedback about sealing up the panels though, will definately do the same.
Gee they dont miss you on the price, might just have a crack at doing it myself. What does everyone think the neatest way to bend it would be?
Im not hiding the rust on my truck, none in that area, just like the look of it. Thanks for the feedback about sealing up the panels though, will definately do the same.
No rust but my tailgate was warped. So i bent it back and worked it with my new lights. 3mm Steel grid plate.
I also use it for under the doors.
I know its not a 40 series. But it is relevant to the checker plate idea.
Some people like it. Some dont. Its my car. Not theirs. I know the reason i did it for. They dont.
If your using aluminium or thin sheet steel.
Try and use a guide the same radius as your quarters. If you cant bend it by hand over the sample radius, I think you may have to get a section rolled in a press. (i have a very limited sheetmetal experience )
I also use it for under the doors.
I know its not a 40 series. But it is relevant to the checker plate idea.
Some people like it. Some dont. Its my car. Not theirs. I know the reason i did it for. They dont.
If your using aluminium or thin sheet steel.
Try and use a guide the same radius as your quarters. If you cant bend it by hand over the sample radius, I think you may have to get a section rolled in a press. (i have a very limited sheetmetal experience )
I am Tim
I dont know if its the angle or the drss he is wearing, but does anyone else reckon ray's ass looks BIG? in that checkerplate?jessie928 wrote:who cares if you use it to cover up rust?
on my thrash around its covering up heaps of rust:)
Rays truck looks BEASTY!!
LOL at the virgin comment.
Jes
hands and mums dont count!!!
Sheet metal roller. I did mine on one and it worked awesome, sheet metal workshops will do it.DrSlug wrote:Ah thanks for that guys.
Gee they dont miss you on the price, might just have a crack at doing it myself. What does everyone think the neatest way to bend it would be?
Im not hiding the rust on my truck, none in that area, just like the look of it. Thanks for the feedback about sealing up the panels though, will definately do the same.
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 1 guest