Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3 speed auto rebuild

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 33
Joined: Mon Jul 13, 2009 7:01 am
Location: nsw

3 speed auto rebuild

Post by dmould66 »

anyone know where i can get a rebuilt 3 speed gearbox or rebuild kit from? mine slips badly until warm driving me crazy.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Any auto trans shop will be able to deal with the 3 speed - It's been used in holdens forever. I've been quoted about $600 for a rebuild (not drive - in drive-out - that was supply trans only to workshop)

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: 3 speed auto rebuild

Post by Guy »

dmould66 wrote:anyone know where i can get a rebuilt 3 speed gearbox or rebuild kit from? mine slips badly until warm driving me crazy.
New fluid correct level (trans warm motor running) .. will most likley be OK .. way cheaper give that a try prior to forking out for a rebuild you may not need.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 33
Joined: Mon Jul 13, 2009 7:01 am
Location: nsw

Post by dmould66 »

flushed it several times, dropped sump cleaned filter, checked for vacum leaks, changed valve on vacum line (on manifold) fitted new cooler and lines still does it! if i can find a good rebuilt box id swap it in and be done with it.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

I'd echo others comments about getting it rebuilt as opposed to DIY.

Autos are complex beasties / require special tools / and a nice clean environment to do properly.

Rebuild or second hand ( assuming the replacments not crap ) would be my choice.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 33
Joined: Mon Jul 13, 2009 7:01 am
Location: nsw

Post by dmould66 »

Gwagensteve wrote:Any auto trans shop will be able to deal with the 3 speed - It's been used in holdens forever. I've been quoted about $600 for a rebuild (not drive - in drive-out - that was supply trans only to workshop)

Steve.
do you know what holdens?
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

dmould - its a trimatic...

although different bellhousing i beleive to any holden boxes
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 33
Joined: Mon Jul 13, 2009 7:01 am
Location: nsw

Post by dmould66 »

so use my belhousing-transfer box, but what holdens?
Top
Posts: 82
Joined: Sat Oct 13, 2007 8:20 pm
Location: brizzy

box

Post by sic_zook »

there a trimatic box but differant. they run the same clutch plates, seals n
bands as all the othere trimatics do but run a differant planitary gears n
a differant pump, case, bellhousing, converter n valve body so pay an auto shop to do it there 1 of the cheapest autos 2 rebuild or get an
import ONE
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 40 guests