Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra Diff Centre's

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Sierra Diff Centre's

Post by Dominator »

Am going to put a lock rite in the front of the sierra. Just want to know how to tell the difference between the different diffs. I have two here. One i am guessing is a 2 pinion and the other is 4 pinion or a lsd i am not sure. I dont know a whole lot about diffs. I can post pics if you need.
Thanks.
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Top
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Post by Dominator »

Image

2 pinion?

Image

4 pinion or lsd?
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

A 2 pin carrier, the centre in being held by 2 arms and you can see the spider gears clearly.

A 4 pin carrier, the spider gears are fully enclosed so you can't see them.

An lsd.. Very rare from vitara's.. Not in aus sierra models.
I am Tim
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

1st one is 2 pin

2nd is 4 pin

Not lsd

Its not explained as 2 or 4 pinion either. The pinion is the small diff gear/shaft in the diff centre.

The '2 or 4 pins' are holding the spider gears.
I am Tim
Top
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Post by Dominator »

Thanks heaps mate. Just had a look in the seach and found a pic that helped me. Cheers anyway.
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

BlueSuzy wrote: Its not explained as 2 or 4 pinion either. The pinion is the small diff gear/shaft in the diff centre.

The '2 or 4 pins' are holding the spider gears.
that is exactly how you describe them. 'pinions'. 2 'pinion' carrier or 4 'pinion' carrier.

to describe them as pins would mean a single pin as in the widetrack, or 3 pin as in the narrow, but this is not used in the industry.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

ok my bad :oops: :oops:
I am Tim
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests