Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Control arms!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Control arms!

Post by get it up there »

Hey guys.. just a quick question - im after a measurement (please!!) of the upper and lower control arms, off an 80 series cruiser. Also, do the lengths vary between the years or anything? Thanks heaps!!
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: Control arms!

Post by crankycruiser »

get it up there wrote:Hey guys.. just a quick question - im after a measurement (please!!) of the upper and lower control arms, off an 80 series cruiser. Also, do the lengths vary between the years or anything? Thanks heaps!!
the lenghts dont vary, but the earlier 80's had heaps beefier arms!

I'll grab a measurement for ya tommora!
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

80 series lowers are 700mm eye to eye.

Don't know about uppers though.

Cheers
Top
Posts: 804
Joined: Thu Aug 07, 2008 9:44 am
Location: Perth

Post by pinkfloyddsotm »

400mm eye to eye ,maybe a couple mm under for the uppers.
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

thanks heaps fellas!! By the measurements i have got, theres bugga all difference compared to the GQ's lengths. Im about to do a coil conversion in the rear of my sierra.. just trying to source arms which will be tough enough and long enough to do the job. Reckon i'll go with the 80 series arms though. There will be a add in the "wanted" section if anyone can help!! Thanks again! :armsup:
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 38 guests