Hi guys,
I'm thinking of further raising the rear suspension. Currently it is in about 6cm of height and I'm thinink of replacing the second leaf (its 3+1) with another like Rancho, Procomp, Skyjacker, Superlift, etc.
Any suggestions on this? Is there any add-a-leaf solution that matches Feroza's rear suspension?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Add-a-Leaf lift mod (for Feroza)
Moderator: Tiny
Oh so true -chugga wrote:if you do go ahead get a kidney belt
And a neck brace as you'll spend lots of time looking out the side windows when it decides to get awfully sideways on rough roads. And BTW choice of rear shock is CRITICAL to taming the Ferozas rear end.
Don't overlook spacing your bump stops when you lift it as well. I'll not try and confuse the discussion with the why's - but its VERY important to the off road capability of a live axle system.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 1 guest