Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ rear link End Dimensions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

GQ rear link End Dimensions

Post by lay80n »

Hi,

Can anyone measure the ID of a nissan rear link end? Or if you know it off your head even better. I have the bush measurements, just need to machine the new link ends to get the proper interference fit.

Cheers,

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 59
Joined: Wed May 07, 2008 2:58 pm
Location: Melbourne

Post by Look'n 4 Mud »

Hi Mate, sorry, which bit do you mean by the "rear Link?" and i might be able to help you. I could maybe measure or i have a factory manual here to scan the right page for ya.

CHeers
GQ TD42, MTQ Turbo, Frozen Boost IC, Flexi 5", Drop boxes, Locked both ends, Superiors everything. Custom rear bar, sliders, Hi Mount, Plasma. TOY. GU IV TD42T Tourer stock with a list.
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

The ends of the rear control arms. Need the ID so we can finish the links off and press the bushes in.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 59
Joined: Wed May 07, 2008 2:58 pm
Location: Melbourne

Post by Look'n 4 Mud »

sent you a PM
GQ TD42, MTQ Turbo, Frozen Boost IC, Flexi 5", Drop boxes, Locked both ends, Superiors everything. Custom rear bar, sliders, Hi Mount, Plasma. TOY. GU IV TD42T Tourer stock with a list.
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

we have come up with a 50.25 bore does anyone have anything else different ?

basically im boring out link ends to suit cal off road gq bushes. which arnt round to begin with
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I do mine 49.8mm
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

The cal off road bushes i have here are measuring 50.2 to 50.4 out of round

that an awful lot of interference 49.8 :shock:
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I use std nissan bushes. If you are only going to use cal bushes why not make them to suit? But if you ever need to fit a std nissan bush it will be loose. I would not go bigger then 50id but suit your self.
Top
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

Post by 85lux »

i´ve done 50.00, it is a lot of interferance but its not like you are pressing a peice of solid into it. you are pressing tube into tube so the interferance needs to be greater to generate a secure fit.
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

anyone had the chance to measure standard ones ?
xxxx wrote:
:bad-words: :snipersmile:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests