Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6 inch lift in Tasmania and ACT

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2
Joined: Fri Jul 31, 2009 9:43 pm
Location: New Zealand

6 inch lift in Tasmania and ACT

Post by nigelc »

Hi to the forum , does any know what the maximum lift you can get engineered in both Tasmania and ACT. I currently have a 6 inch lift in NSW on a LWB GQ and will be moving to either Tasmania and ACT next year with work.

Thanks in advance.
Top
Posts: 103
Joined: Tue Sep 02, 2008 9:47 pm
Location: tassie

Post by tassie wombat »

had my gq engineered at the start of the year in tassie,5" springs with 33"s= 6" in total lift,no problems at all!
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Highest you can currently go in the ACT is 4" lift.
Top
Posts: 119
Joined: Mon Jan 21, 2008 6:36 pm
Location: Perth

Post by smash250 »

If its engineered in one state, most of the time regardless of individual state rules, they will let it pass and be registered as is.

This happens in WA, currently our DPI have a case of Extreme retardation and have a nothing over 50mm limit, however i have two mates who went over east and brought a GQ and GU both with 6" lifts and both engineered over east and they past our pit inspection no problems.
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Don't think so mate, I know countless people who have bought cars engineered/regoed interstate and had major hassles trying to get them regoed in ACT. Normally they have to get them re-engineered here, its all a load of shit.
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

lift

Post by DR Frankenstine »

Tassie recognises all engineering certificates and will transfer straight over.
Remember some days your the pigeon and other days your the statue
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests