Tech Talk for Cruiser owners.
Moderators: toaddog , Elmo , DUDELUX
Posts: 18 Joined: Wed Oct 07, 2009 10:49 pm
Location: perth
Post
by 666mademedoit Mon Nov 30, 2009 1:30 pm
Anyone out there know of any cams available to give slightly better bottom end torque for the trusty old 1hz?
[/code]
Posts: 2347 Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth
Post
by Z()LTAN Mon Nov 30, 2009 1:46 pm
cam regrinding is useless for a N/A application with the 1HZ
Locktup4x4.com.au - For all of your hardcore gear Outlaws4x4.com
Posts: 352 Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia
Post
by GO79 Mon Nov 30, 2009 7:02 pm
a place in ozi park just off colingwood st does custom cam grinds i think the only place in perth still as most cams now days are off the shelf
Posts: 18 Joined: Wed Oct 07, 2009 10:49 pm
Location: perth
Post
by 666mademedoit Tue Dec 01, 2009 12:16 pm
camshaft engineering have shut up shop so there not an option
Posts: 18 Joined: Wed Oct 07, 2009 10:49 pm
Location: perth
Post
by 666mademedoit Tue Dec 01, 2009 12:18 pm
Z()LTAN wrote: cam regrinding is useless for a N/A application with the 1HZ
just worried if i made the airbox and intercooler the same size as yours my car would be too top heavy!!!!
Posts: 2347 Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth
Post
by Z()LTAN Tue Dec 01, 2009 3:46 pm
Ah heavy as it all may look, it still has more poke than my v6 commodore
Locktup4x4.com.au - For all of your hardcore gear Outlaws4x4.com
Posts: 18 Joined: Wed Oct 07, 2009 10:49 pm
Location: perth
Post
by 666mademedoit Tue Dec 01, 2009 7:24 pm
Z()LTAN wrote: Ah heavy as it all may look, it still has more poke than my v6 commodore
dont doubt it! I'll be honest the 4.88's allow me to push the 35 and 37 inch tires i run quiet well... A little bit more poke from idle never hurts hence why im seeking a cam
Posts: 352 Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia
Post
by GO79 Wed Dec 02, 2009 12:31 am
666mademedoit wrote: camshaft engineering have shut up shop so there not an option
Dang i only got a custom one last year
Posts: 82 Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra
Post
by Glux Wed Dec 02, 2009 8:24 am
with a turbo is it worth getting a cam custom ground?
Posts: 18 Joined: Wed Oct 07, 2009 10:49 pm
Location: perth
Post
by 666mademedoit Wed Dec 02, 2009 10:20 am
GO79 wrote: 666mademedoit wrote: camshaft engineering have shut up shop so there not an option
Dang i only got a custom one last year
I think the guy tried to sell the business but had no takers so he auctioned off all the tooling and machinary
Posts: 1383 Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle
Post
by oldmate Wed Dec 02, 2009 10:25 am
Glux wrote: with a turbo is it worth getting a cam custom ground?
I think you'd be better off investing in the 24 valve motor (multivalve) Or you could atleast put the multivalve head, pistons etc on the 1hz block.
the pistons come awfully close to the valves in a stock 1hz so i cant see there being much to work with.
Posts: 18 Joined: Wed Oct 07, 2009 10:49 pm
Location: perth
Post
by 666mademedoit Wed Dec 02, 2009 11:06 am
I had heard the multivalve heads fitted but wasnt sure if it was one of those "I saw a mates uncles cousin who swears blind it fits straight up"
Posts: 82 Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra
Post
by Glux Wed Dec 02, 2009 11:26 am
so does anyone know if the muiltvalve head fits or whats involved in putting one on
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Wed Dec 02, 2009 6:08 pm
666mademedoit wrote: I had heard the multivalve heads fitted but wasnt sure if it was one of those "I saw a mates uncles cousin who swears blind it fits straight up"
search, im pretty sure there was some issues.
hands and mums dont count!!!
Posts: 3224 Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!
Post
by ferrit Wed Dec 02, 2009 8:57 pm
From what i hear, the multivalve head on the 1HZ with 1HZ pistons would give you a compression ratio of about a million:1, just before the valves got mashed
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 141 Joined: Thu Aug 23, 2007 5:00 pm
Location: Rockhampton
Post
by horndog Thu Dec 03, 2009 6:01 pm
yeah it wouldnt work at all but whack in 1hdt rods and pistons and u have the same bottom end, not sure about the head aligning
Users browsing this forum: No registered users and 3 guests
[/code]
