All,
Have searched and searched and finally gave up looking in all of the ARB vs Pro threads.
Anyone know, or can easily find out the size of the 'oversized' bearings needed to install a Pro into a rear GU 233 diff? I have the TJM part number in the instructions (no idea what it is, I aint at home at the moment), but the TJM part No# means bugger all when buying bearings from the local engineering shop.
(I scored a Pro about 14 months ago fairly cheaply, but didn't come with the oversized babies. About time I install it I think.)
ta in advance for any info.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TJM Pro-locker bearing size for rear GU 233 diff
TJM Pro-locker bearing size for rear GU 233 diff
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Who is online
Users browsing this forum: No registered users and 0 guests