Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu patrol lacking power and hard to start
gu patrol lacking power and hard to start
i have 1999 gu 4.2td and i recently changed my fuel filter which had rust on the top of it and within bout 20 mins of it my car was lacking power and cuts out at bout 3500 rpm in 2nd gear if you get up it is there any filters between the main filter and the injectors i have had my turbo checked out and its fine and dont have egt guage so i cant tell what its running on
Yep. sounds like it is sucking air.
I have an aftermarket with a glass bowl and water separator. You can see it "drip" air into the system if it is not tight enough.
Tight enough can be pretty bloody tight mate.
Bleeding can be a bitch, try tightening it first and taking it for a spin if no joy start cracking injectors and bleeding out.
Good luck.
I have an aftermarket with a glass bowl and water separator. You can see it "drip" air into the system if it is not tight enough.
Tight enough can be pretty bloody tight mate.
Bleeding can be a bitch, try tightening it first and taking it for a spin if no joy start cracking injectors and bleeding out.
Good luck.
GQ TD42, MTQ Turbo, Frozen Boost IC, Flexi 5", Drop boxes, Locked both ends, Superiors everything. Custom rear bar, sliders, Hi Mount, Plasma. TOY. GU IV TD42T Tourer stock with a list.
x2Tomo_89 wrote:there is a thimble filter under the banjo fitting on the supply line to the pump. this can get clogged up and give poor power
try that little filter first before cracking injectors. some people just throw it out. i did 2 years ago and still going strong. but each to their own.
undo banjo fitting.
there'll be a spring down in the hole you pull the bolt out of, remove that.
then there'll be a little brass looking gauze thimble filter you might not be able to see through the diesel
you might need a fine bit of wire bent in the shape of a tent peg to hook it out.
hope it helps. i thought i was up for an injector pump before i did this.
try these for a few pics.
http://www.outerlimits4x4.com/ftopic760 ... ble+filter
http://www.outerlimits4x4.com/ftopic153203.php
GU td42 ute with go fast bits and go futher bits
Who is online
Users browsing this forum: No registered users and 0 guests