Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clicking noise

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 10
Joined: Sat Sep 26, 2009 1:14 am
Location: boyanup

clicking noise

Post by strom86 »

hey crew .

I was just wondering if any1 had the same prob as i do .I own a 03 patrol 4.2 turbo diesel ute .When im drivig there is a faint clicking noise that gets louder the faster i go ,it sounds as if its coming from behind the speedo area .I have 2 other mates with the same car and theres dont do it .plz help
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

zip tie on the shaft? :D
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

It might be the jigger that controls your speedo or tacho needle. Given that it is all electronic, there aren't any cables there to make a noise.

Could alos be a rock/nail/screw in one of your tyres.
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Can you tell if it's matched to engine speed vs road speed? Might help narrow it down.
This is not legal advice.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Front Hubs...
Stone caught in the tread..
Posts: 10
Joined: Sat Sep 26, 2009 1:14 am
Location: boyanup

Post by strom86 »

its not the zip tie trick :lol: ,its not a stone in the tyre .it sounds like its from the tacho or something .i was just wondering if anyone else with a patrol has had this same problem .
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

As an elimination, pull the rear shaft out and go for a short drive in 4x4.
Will eliminate tailshaft and possibly diff (no torque)

Also try rolling down a hill....

>clutch out, in gear
>clutch in, in gear
>clutch in, out of gear
>clutch out, out of gear

Try a couple of different gears too, get it to the rev range where it clicks etc.

I have a clicking noise but its only on take off. It then does it when I reverse. But again, only on take off. Cant help with your problem
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 10
Joined: Sat Sep 26, 2009 1:14 am
Location: boyanup

Post by strom86 »

ok i will try all these options and let yas know.cheers heaps for all of yas help
Posts: 2
Joined: Fri Sep 05, 2008 10:34 am
Location: WA

Post by 4timer »

Had the same symptons in '99 GU....twas the auto lock hubs!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests